At the end of 1979, Mattel Electronics (a division of Mattel
Toys) released a video game system known as Intellivision along with 12 video
game cartridges. Poised as a competitor to the then king of the hill Atari 2600,
Mattel Electronics called their new product “Intelligent Television”,
stemming largely from their marketing plans to release a compatible computer
keyboard for their video games console. Mattel’s marketing was anything *but*
intelligent and almost destroyed the company by 1984. In one sense the system
was very successful, with over 3 million units sold and 125 games released
before the system was discontinued by INTV Corp. in 1990.

The original Master Component was test marketed in Fresno,
California in late 1979. The response was excellent, and Mattel went national
with their new game system in late 1980. The first year’s production run of
200,000 units was completely sold out! To help enhance its marketability,
Mattel also marketed the system in Sears stores as the Super Video Arcade, and
at Radio Shack as the Tandyvision One in the early 1980’s.

1980 was a turbulent year for the Intellivision. Mattel
announced that an “inexpensive” keyboard expansion would be available
in 1981 for the master component to be dropped into. This was to turn the
system into a powerful 64K home computer that could do everything from play
games to balance your checkbook. There was a great deal of marketing money and press
coverage devoted to this unit; a third of the box for the GTE/Sylvania
Intellivision describes the features of this proposed expansion. Many people
bought an Intellivision with plans to turn it into a computer when the
expansion module was released. Months, then years passed. The original
expansion keyboard was released only in a few test areas in late 1981. With the
price too high and the initial reaction poor, the product was scrapped in 1982
before being released nationwide.

1982 saw many changes in both the videogame industry and the
Intellivision product line. A voice-synthesis module called Intellivoice made
sound and speech and integral part of game play, through the use of special
voice-enhanced cartridges. The Intellivision II was also released this year,
which one company spokesperson described as “smaller and lighter that the
original, yet with the same powerful 16-bit microprocessor”. The new
console was more compact than the first, and its grayish body made it look more
like a sophisticated electronic device than the original design.

1983 brought more promises from the folks at Mattel, the
most significant of which being the Intellivision III. This was shown off at
the January 1983 CES show, and lauded in the videogame magazines for many months
afterwards. In June of 1983 at the Summer CES show, Mattel announced it was
killing the Intellivision III and including most of its high-profile features
into their long-awaited computer expansion, the Entertainment Computer System.

Probably the most ambitious effort the Intellivision team
had undertaken, the Entertainment Computer System was comprised of a computer
keyboard add-on, a 49-key music synthesizer, ram expansion for the keyboard
add-on to expand it to a full 64K RAM and 24K ROM, a data recorder to store
programs, a 40-column thermal printer, and an adapter which would allow you to
play Atari 2600 games on your Intellivision. The RAM expansion modules never
saw the light of day. The data recorder, and thermal printer were released as
components for the Aquarius computer. The music synthesizer had but one
software title to take advantage of its capabilities. While the 2600 adapter
greatly expanded the library of available games, much of the steam this
generated had already been stolen by Coleco’s own expansion module.

1984 would spell the end of the original Intellivision as
the world knew it. Terry E. Valeski, Senior Vice President of Marketing and
Sales at Mattel Electronics, along with a group of investors, purchased the
assets, trademarks, patents, and right to the Intellivision in January of 1984
for $16.5 million dollars. The purchase was backed by financing from Tangible
Industries, a division of Revco Drug Stores, The newly formed company was
originally called Intellivision, Inc., and later renamed INTV, Inc., after
Valeski negotiated all rights from Revco in November of 1984. During the next
two years, the new company would lie dormant while plans were being made for a
re-emergence.

In the fall of 1985, the INTV System III (also called the
Super Pro System) appeared at Toys ‘R Us, Kiddie City, and in a mail order
catalog sent to owners of the original Intellivision direct from INTV. The new console
was of the same general design as the original master component, except it
sported a fresh black plastic shell with brushed aluminum trim. Several new games
accompanied the release of the new system, and 1985 would register over $6
million dollars in sales worldwide, indicating that INTV Corp. had indeed revived
the Intellivision. INTV continued to market games and repair services through
the mail with great success. Between 1985 and 1990 over 35 new games were
released, bringing the Intellivision’s game library to a total of 125 titles.

Many more changes were to come during the final six years of
Intellivision’s life. In 1987, an improved master component called the INTV
System IV was shown at the January CES, which sported detachable controllers
and a timing device. Unfortunately, this never saw the light of day either. In
the fall of 1988, INTV re-introduced the computer keyboard adapter through
their mail order catalog on a limited quantity basis. In 1990, INTV
discontinued retail sales of their games and equipment and sold them only
through the mail channels.

The change in marketing was due to agreements with Nintendo
and Sega to become a software vendor for the NES, Game Boy and Genesis. In
1991, INTV sold out its stock of Intellivision games and consoles, and the
company, along with the Intellivision, gradually faded away.

1.2 – Timeline

1979 – Intellivision is test marketed

1980 – Mattel Intellivision released nationally, Computer
Expansion announced

1982 – Computer Expansion Module scrapped due to high cost
and poor response

1982 – Intellivoice released

1983 – Intellivision II released

1983 – Entertainment Computer System released many
peripherals. Announced

1983 – 2600 System Changer released

1983 – Intellivision III announced

1983 – The videogame market begins to crash

1983 – Intellivision III dropped

1984 – The videogame market bottoms out

1984 – Mattel sells the Intellivision rights to VP Marketing
T.E. Valeski and investors, forming INTV Corp.

1985 – INTV III released, along with new Intellivision
titles. Aggressive marketing adds $6 million sales

1987 – INTV IV announced, to be scrapped later

1990 – INTV Corp. discontinues retail sales, markets through
mail only

1991 – INTV Corp. sells off its remaining Intellivision
stock

2.0) Technical
Information

2.1 – General Hardware
Specs

Intellivision Master Component (these apply to the clones as
well)

CPU: GI 16 bit microprocessor

Memory: 7K internal ROM, RAM and I/O structures,
remaining 64k address space for external programs.

Controls: 12 button numeric key pad, four action
keys, and 16 direction disc

Sound: Sound generator capable of 3 part harmony with
programmable ASDR envelopes.

Color: 16 colors

Resolution: 192v x 160h pixels

2.2 – Processor Specs

GI 1600, running at 894,886.25 Hz (NTSC) and 1MHz
(PAL/SECAM). Processor has 16 bit registers, uses 16 bit RAM, and has 10 bit
instructions. Intellivision cartridges contain ROMs that are 10 bits wide. Ten
bits are called a decle.

The CPU was strange. For example, if you did two ROTATE LEFT
instructions, followed by a ROTATE RIGHT BY 2 (rotates could be by one or two),
you did not end up with the original word. The top two bits were swapped!

Ken Kirkby also has this to add: “The GI CP1600 was
developed as a joint venture in the early seventies between GI and Honeywell.
One of the first commercial uses of the CP1600 was its incorporation into
Honeywell’s TDC2000, the first distributed control system, and prototypes
existed in late ’74 I think. Honeywell’s then Test Instrument Division also
incorporated into a Cardiac Catheterization system called MEDDARS which was
released for sale about 1979. The CP1600 was definitely a 16 bit chip.”

John Dullea dug this information up during a stroll at his
local library:

“In the Penn State Library I found a book called “An
Introduction to Microcomputers, Vol. 2: Some Real Microprocessors”, By
Adam Osborne, Osborne & Associates, Inc., 1978. ISBN: 0-931998-15-2.
Library of Congress catalogue card #: 76-374891.

It has lots of info on the CP1600/1610 CPU in the
Intellivision. Chapter 16 has the pinouts of the CPU:

D0-D15	Data and address bus	Tristate, bidirectional
BDIR, BC1, BC2	Bus control signals	Output
(PHI)1,(PHI)2	Clock signals	Input
MSYNC	Master synchronization	Input
EBCA0-EBCA3	External branch condition addr lines	Output
EBCI	External branch condition input	Input
PCIT	Program Counter inhibit/software	Input
	Interrupt signal
BDRDY	WAIT	Input
STPST	CPU stop or start on high-to-low	Input
	transition
HALT	Halt state signal	Output
INTR, INTRM	Interrupt request lines	Input
TCI	Terminate current interrupt	Output
BUSRQ	Bus request	Input
BUSAK	External bus control acknowledge	Output
VBB, VCC,	Power and ground
VDD, GND	Power and ground

The logic board in the Intellivision unit (original model
2609) reveals a number of (important) chips:

Sound AY-3-8914 40-pin

ROM RO-3-9503-003 40-pin

ROM RO-3-9502-011 40-pin

Color AY-3-8915 18-pin

And there is the cartridge ROM:

ROM AY-3-9504-021 28-pin

In addition, there are three 40-pin chips that have heat
sinks with epoxy on top. Now, you may try this, but be EXTREMELY careful
(or just listen to what I found): I carefully removed the three heat-sunk chips
and looked at them; they have designations on the bottom!

STIC AY-3-8900-1 40-pin

RAM RA-3-9600 40-pin

CPU CP-1610 40-pin *

Having the CPU location and pin outs, one can use an ohmmeter to map the pins to the cartridge pins:

Looking AT the cartridge, not the Intellivision unit: you
probably should double-check this, but I obviously can’t accept any
responsibility for any damage to your Master Component. (I’m not 100% sure
about the assignments for VCC and GND)

All *x pins are connected; cartridges have a loop on the top
row connecting them, and the connector in the Intellivision unit connects the
top row *x pins to those on the bottom row. Internally, *x pins are connected
as follows:

*1 STIC pin 7

*2 STIC pin 6

*3 STIC pin 8

There may be other connections to them as well; I don’t know
why they connect to the ROM pins. However, considering the system changer’s
ability to route in external video, having pins going to the STIC seems to make
some sense. I suspect that they may switch the ROM from address write mode to
data read mode (like the three bus control lines on the CPU, maybe).

Please note that the chapter mentioned above has all opcode
and register info, as well as timing information for the CP1600/1600A/1610
CPUs.

2.3 -Graphics Specs

160×92 pixels, 16 colors, 8 sprites (they were called
“moving objects” rather than sprites) 8×8 in size. Sprites could be
linearly doubled.

Graphics is character based. The screen is twelve rows of
twenty characters. Characters either come from Graphics ROM (GROM), which
contains the usual alphanumeric symbols and a bunch of other things meant to be
useful in drawing backgrounds (256 characters in all), or Graphics RAM (GRAM),
which the program can use to build pictures needed that aren’t in GROM (like
sprite images). GRAM can hold 64. The pre-designed sprites located in ROM were
a big help in speeding up game play. Eight of the colors are designated as the
primary colors. The other eight are called the pastel colors.

There were two graphics modes: Foreground/Background, and
Color Stack. In F/B mode, you specify the colors for both the on and off pixels
of each card (“card” is the term for a 8×8 block on the screen). One
of these (the on pixels, I think) could use any color, but the other could only
use the primary colors.

In CS mode, you can give the chip a circular list of four
colors (pastels and primaries are both allowed). For each card, you specify the
ON bits color from any of the 16 colors, and the OFF bits color comes from the
next color on the circular list. You can also tell if the list is to advance or
not. Thus, in CS mode, you only get four colors for the OFF bits, and they have
to be used in a predetermined order, but you get to use the pastels. Most games
used CS mode.

A sprite could be designated as either being in front of or
behind the background, which determined priority when it overlapped the ON
pixels of a background image.

You could tell the graphics chip to black out the top row or
the first column (or both) of cards. You could also tell it to delay the
display by up to the time of seven scan lines, or to delay the pixels on each
scan line by up to seven pixel times. Using these two features together allows
for smooth scrolling.

For example, a game that is going to scroll a lot sideways
could black out the first row. Now, to scroll the background to the right by
one pixel, you just have to delay by one pixel time. This moves everything
over. The black part is NOT delayed –that is always displayed in the first 8
screen pixel locations. The net result is that you now see one pixel that was
previously hidden under the black strip, and one pixel on the other side has
fallen of the edge, and everything appears to have moved over. Thus, to scroll,
you only have to move the screen memory every eighth time, when things need to
be shifted a full card. There is no need for a bitblt-type operation.

The hardware detected collisions between sprites and other
sprites or the background.

GRAM and screen memory could only be manipulated during
vertical retrace. At the end of vertical retrace, you had to tell the chip if
it should display or not. If you weren’t done, you could keep manipulating by
not telling it to display, but then you end up with a flicker which was unacceptable.

2.4 -Operating System
Specs

The operating system did several things:

It allowed the program to specify a velocity for each
sprite. The OS would deal with adjusting the sprite position registers for you
and cycling through your animation sequence.

For each pair of sprites you could specify a routine to be
called when that pair of sprites collided. For each sprite, you could specify a
routine to be called when that sprite hit the background or the edge of the
screen.

It maintained timers, and allowed you to specify routines to
be called periodically.

It dealt with the controls. You could specify routines to be
called when the control disc was pressed or released, or when buttons were
pressed or released. It provided functions to read numbers from the keypad. The
calling sequences for these were a bit strange. When you called these, they
saved the return address, and then did a return. You had to call them with
nothing after your return address on the stack, and they return to your caller.
When the number is ready, they return to after where you called them, but as an
interrupt. In generic assembly, it would be like this (I’ve long since
forgotten 1600!):

jsr foo

bar

:..

….

foo: ;do some setup or whatever

jsr GetNumberFromKeypad

spam: …

GetNumberFromKeypad returns to bar immediately. When the
number is read, spam will be called from an interrupt handler. If you didn’t
know that a routine did this, reading code could get rather confusing!

3.0) Hardware
Descriptions

3.1 – Intellivision
Master Component

The original, the one the started it all. It has a brown
molded plastic case with gold trim on the top. Two controller wells are
recessed in the top for housing the two hard-wired controllers. The controllers
are also brown molded plastic, with a 12-key numeric keypad, two fire buttons
located on each side, and a gold disk centered in the bottom third of the
controller which is used to control your on-screen persona. The power and reset
switches are located on the top of the unit, in the lower right hand corner.

3.2 – GTE / Sylvania Intellivision

This console is identical to the original Intellivision
except for the brand name. The box has a very detailed description of the Keyboard
Component/Computer Adapter that was never released… Rumor has it that these
were given away for free with the purchase of a Sylvania television.

3.3 – Radio Shack
Tandyvision I

This console has faux wood-grain paneling in the place of
the INTV I’s gold panels. Otherwise, this unit is totally identical to the INTV
I.

3.4 – INTV System III

In 1984, the vice president of marketing for Mattel Electronics
bought the rights to the Intellivision and formed a company called INTV Corp.
The result of this venture was the release of the INTV III, or Super Pro
System. This redesigned unit is physically identical to the original INTV I,
except that it has a black plastic case with silver plates, and also has a
Power LED indicator between the Power and Reset switches. The controllers are
black with silver discs, and the keypads were either silver with black
lettering or black with silver lettering.

3.5 – Sears Super Video Arcade

Up until recently, if you wanted to market your product
through Sears, it had to have their name on it. Much like Atari with the
Tele-Games Video Arcade, Mattel created a clone that was similar yet different
to the INTV I. Functionally identical, this unit has a cream-colored case with
a wood-grain front, and removable controllers that rest in the center of the
console. The power and reset switches are circular in shape and about an inch
in diameter:

3.6 – Intellivision II

In 1982, Mattel decided that they needed to spice up the
design of the Intellivision, as well as attempt to shave some costs; the
Intellivision II was the result. Some key differences include:

– A much smaller footprint

– Grey plastic case with a thin red stripe circling the unit

– External power supply (not standard by any means)

– Detachable controllers

– Combination Power/Reset switch (you have to hold the
switch for 5 seconds in order to turn the unit off)

– Power LED Indicator

This unit contained a revised ROM which was necessary for
the System Changer (more on that later), but also caused incompatibilities with
certain Coleco games (Donkey Kong, Mouse Trap, and Carnival) and some Mattel
games (Word Fun, Shark Shark).

This unit also used a non-standard AC Adapter, making it
near impossible to find a replacement at your local Radio Shack. For those who
are handy enough to construct their own, here are the specs:

Input: 120V 60Hz 25 Watts

Output: 16.7V AC 1.0A

The INTV II Power supply can also be substituted by the
following power supplies: Atari 1050 disk drive, Genesis I, Atari Jaguar. Use
at own risk!

3.7 – Keyboard Component / Computer
Adaptor

This unit only saw a limited test marketing run of less than
one thousand units in late 1981. It was color-keyed to match the INTV I, and
the entire game console fit into the top of the unit. It sported a full-stroke
60-key keyboard, built in cassette recorder, and brought the total memory
capacity of the Intellivision to 64K. A modem expansion module was also
planned. Due to its high street price (around $700, versus an announced price
of $150), the plans to market this unit nationally were shelved.

3.8 – Intellivoice Voice Synthesis Module

This module attaches to the cartridge port of your Intellivision,
and through the use of special voice-enhanced games, your INTV could talk.
There were 5 games released to take advantage of the unit’s capabilities (Space
Spartans, B-17 Bomber, Tron Solar Sailor, Bomb Squad, and World Series Major
League Baseball (also requires the ECS) ). The module has a dial on the front
to control the voice’s volume. Voice games will work without the adapter, but
since the voice was made to be an integral portion of the game, they’re
extremely difficult to play.

Underneath the plastic Mattel Electronics logo on the top is
an expansion connector.

3.9 – Entertainment Computer System

Spurred on by the increasingly popular home computer market
and lawsuits, Mattel introduced the Entertainment Computer System along with
the INTV II in 1983. This unit plugs into the cartridge port of the INTV II,
and has its own cartridge slot, two additional controller ports, a cassette
interface, and a balance dial for controlling the output level of the ECS’s
three additional voices.

The unit requires an additional power supply. Here again,
Mattel used something completely different from the rest of the industry:

Output: 10.0 VAC, 1.0 A

The ECS came packaged with a 49-key chiclet-style keyboard,
power supply, and a well-written manual describing INTV BASIC. Upon returning
your registration card, you would receive “The Step-By-Step Guide To Home
Computing”, which included a very detailed BASIC Tutorial, and some more
in-depth study of the ECS’s abilities. The unit sported an additional voice
chip (bringing the grand total to 6), 10K of ROM and 2K of RAM for programming
purposes.

This unit comes in two flavors, the grey mentioned above,
and also a dark brown color (sold in the European market) keyed to the original
Intellivision. Functionally, the units are identical except for the 220 volt
power supply. The dark brown variety is extremely difficult to find. Expansions
announced for this unit includes a 16K RAM, 8K ROM expansion, a 32KRAM, 12K ROM
expansion. None of these peripherals ever made it to market.

3.10 – Music
Synthesizer

This was an add-on for the ECS, a full 49 key piano style
keyboard. It has 6 note polyphony (for you non-musicians, can play 6 notes at
once), and plugs into the controller ports on the ECS via a dual 9 pin
connector. Melody Blaster was the only program released by Mattel to
specifically take advantage of this component. This unit also came molded
either in light gray or dark brown plastic (European market). Although they are
both pretty tough to find, the brown variety is extremely rare.

3.11 – System Changer

The Atari 2600 had the biggest library of games at the time,
and Mattel added the capability of playing 2600 carts to the INTV II with this
module. This unit also interfaces with the INTV II via the cartridge port. It
has a 2600 cartridge port on the top of the module, Game Select and Reset keys
flanking the two difficulty and color/BW switch. The controller ports are
located on the front of the module, and any of your favorite 2600 compatible
controllers work just fine. If you don’t happen to have Atari controllers lying
around, you can use the disc controller attached to the INTV II in lieu of
them. If you happened to own an original Intellivision, sending in your Master
Component and $19.95 would get you a main board modification that was required
for this unit to work with the older equipment.

3.12 – Joystick
Substitutes

For the masses that couldn’t stand to use the
Intellivision’s awful disc controllers, there were a couple solutions:

– INTV Corp. released a set of clip-on Joysticks which
snapped onto the lower half of your controller, these are of questionable
quality and value:

– A couple of other companies released sticks that either
glued onto the existing discs, or replaced the disc entirely, with a shaft that
screwed into a hole drilled into the center of the replacement disc. One of
these add-ons also came with oversized fire buttons that clipped over the
existing buttons.

3.13 – Compro
Electronics Videoplexer

Tired of switching between your 8 favorite games? Get a
Videoplexer! Similar to the RomScanner for the Atari 2600, this unit would
store 8 Intellivision games and allow you to switch them on the fly via a touch
panel on the front of the unit. The unit plugs into the cartridge port of the
base system, and on top there are slots for up to eight cartridges. At the base
of the Videoplexer, there are 8 buttons for switching between the cartridges.

3.14 – PlayCable

The idea of beaming videogames through Cable TV is not new;
a company called PlayCable created an adapter for the Intellivision that
plugged in to the cartridge port, and the service had a selection of 20 of the
most popular games available every month.

Steven Roode and his brother were fortunate enough to have
this service, and what follows is his description of the hardware and the
service provided:

“When you signed up for PlayCable, you were given a box
which would plug into the Intellivision’s (INTV’s) cartridge port. The box had
the same color scheme as an INTV I, and its dimensions were the same height and
depth of the INTV I, with the length of an INTV II. It had a power cord coming
out of it. Additionally, you were given a RF box which had a coaxial in, a
coaxial out, and two RCA outs. One RCA out was connected to the INTV, and one
was connected to the PlayCable unit.

For about $4.95 a month, the cable company would transmit 20
games (Although for the first few months, there were only 15 games). When you
turned on the INTV, a sort of ‘boot screen’ would come up and you would hear a
sound that sort of sounded like a clock ticking. After a couple of seconds, you
would hear 4 long beeps and the PlayCable title screen would pop up. There
would be one of four different songs in the background (I know that one was the
victory song in checkers, one was The Entertainer, one was Music Box Dancer,
and I forget the other one). Each screen listed 5 games (I think, it may have
been 4), and you could cycle through the games lists by pressing the disc. When
you found the game that you wanted, you would press the number next to it, and
press enter. A title screen of the game would pop up, and again you would hear
ticking. After a couple of seconds, you would hear the same 4 long beeps and
the game would be ready to play”

The following are excerpts from a PlayCable-specific game
manual describing the game loading process:

HOW TO SELECT YOUR FAVORITE GAME FROM PLAYCABLE:

– Set the PlayCable TV/Game switch to GAME.

– Turn on your television and turn to Channel 3 or 4. (The
same setting as the switch on the bottom of the Mattel Electronics Master
Component.)

– Turn on the Master Component; push the RESET button.

– The screen will read, “PLAYCABLE CATALOG.” The
screen will then change to: “PLAYCABLE PRESENTS INTELLIVISION. PUSH
DISC.”

– Push the directional disc (the big, round button on either
hand control) to see each page of the catalog. The series will start again
automatically as you keep pushing the disc.

– To call up a game, find the page on which the game
appears. Press the number of the game on your keypad, and then press ENTER.
Wait about 10 seconds. When the four rectangles in the upper left hand corner
of your screen turn white, your game is ready.

– Push the disc again and the game will appear.

– To select a new game, push RESET. The catalog will
re-appear.

One of the neater aspects of PlayCable was that they would
rotate out about half of the games every month. When they did, you would get
instruction books and overlays for each new game in the mail (and all of the
overlays were attached with perforations; so you would have to sort of tear
them apart).

PlayCable tended to have some pretty decent games on it. You
would always have a couple of the ‘classics’ every month (i.e., I don’t think
Baseball and Astrosmash ever came off!), and you would get some pretty recent
games as well. Once in a while they were slow in changing the games. They were
supposed to be rotated out on the 1st of each month. Believe me, my brother and
I would fake sick to stay home from school sometimes on the 1st! If by noon
they weren’t changed, we would call the cable company and by the end of the day
they were updated (One other neat little side note: When they changed the games
out, the system would still be up. First, all game choices would disappear.
Then, two by two, new games would pop up. You could actually see them appear!)

We had PlayCable for about two years (I think 81-82), and
our cable company was big into promoting it. They had INTV playathons at some
of the local malls, giving away free INTVs to high scorers in certain games.
During one promotional weekend, the cable company showed nothing but people
playing INTV and the announcers commenting on how realistic the game play was.
I think we even have one PlayCable T-shirt lying around somewhere!

Finally though, our cable company stopped carrying
PlayCable, and unfortunately, we had to surrender the box. I would like to have
kept it to see how it worked. All in all, our family has a lot of fond memories
of PlayCable… I think it helped to enhance the uniqueness and mystery of the
Intellivision.

3.15 – Intellivision
Tester (MTE-100)

This is a large metal briefcase that appears to be a
portable diagnostic unit for testing Intellivision cartridges and the removable
chips from malfunctioning systems. It consists of two controllers mounted onto
the top of the unit, zero insertion force (ZIF) sockets for testing chips, and
various other controls to test the chips under different operating conditions.
To run the diagnostics, the system uses an integrated MTE-201 test cartridge.
Internally, the system appears to be a modified 2609 motherboard along with an
alternative power supply circuit. It is interesting to note that the
controllers mounted on the top of the unit match the layout in the controller
test section of the MTE-201 tests, which means they are reversed -i.e. the left
controller is mounted on the right. This unit was not sold to the public, and
it is unknown if more were produced. At the time of this writing, the history
of this unit remains shrouded in mystery.

(Thanks to Steve Orth for the info)

4.0) Cartridge Listing

4.1 – Released Titles

Overlay Key:

Yes = has overlays

No = No overlays

L/R = has different overlays for the left and right
controllers

Notes: Any interesting tidbits, such as additional
hardware required, release notes, and compatibility.

Manufacturer	Title	Part #	Overlay	Notes
Intelligentvision	4-Tris	9111	Yes	J. Zbiciak released in 2001
Mattel	ABPA Backgammon	1119	Yes	Sears #49 75214
Mattel	AD&D Cloudy Mountain	3410	Yes
Mattel	AD&D Treasure of Tarmin	5300	Yes
Mattel	Armor Battle	1121	Yes	Sears #49 75211
Mattel	Astrosmash	3605	Yes	Sears #49 75229
Imagic	Atlantis	700006	Yes
Mattel	Auto Racing	1113	Yes	Sears #49 75205
Mattel	B-17 Bomber	3884	Yes	Intellivoice
Activision	Beamrider	M-005-02	Yes
Imagic	Beauty & the Beast	700007	Yes
Interphase	Blockade Runner	80100001	Yes
INTV	Body Slam! Super Pro Wrestling	9009	No
Mattel	Bomb Squad	3883	Yes	Intellivoice
Mattel	Boxing	1819	Yes	Sears #49 75221
Mattel	Bump ‘n’ Jump	4688	Yes
Mattel	BurgerTime	4549	Yes
Mattel	Buzz Bombers	4436	Yes
Coleco	Carnival	2488	No	Non-Intv2
AtariSoft	Centipede	70254	No
Dextell	Championship Tennis	8200	Yes
Mattel	Checkers	1120	Yes	Sears #49 75215
INTV	Chip Shot Super Pro Golf	8900	No
INTV	Commando	9000	No
Sega	Congo Bongo	006-06	No
AtariSoft	Defender	70252	No
Mattel	Demo Cart 78′	1682-0950	No
Mattel	Demo Cart 78′ Revision	5032-0710	No
Mattel	Demo Cart 83′	5853-0210	No
Mattel	Demo Cart International	5859-0410	No
Imagic	Demon Attack	700005	Yes
INTV	Dig Dug	9005	No
INTV	Diner	8800	No
Coleco	Donkey Kong	76257	No	Non-Intv2
Coleco	Donkey Kong Junior	76376	No
Imagic	Dracula	700018	Yes
Imagic	Dragonfire	700010	Yes
Mattel	Electric Company Math Fun	2613	Yes
Mattel	Electric Company Word Fun	1122	Yes	Non-Intv2
Imagic	Fathom	7205	Yes
Mattel	Frog Bog	5301	Yes	Sears #49 75234
Parker Brothers	Frogger	6300	No
Activision	Happy Trails	M-003-04	Yes
Mattel	Horse Racing	1123	Yes	Sears #49 75209
INTV	Hover Force	8500	No
Imagic	Ice Trek	710012	Yes
Mattel	Jetsons Ways With Words	4543	Yes	ECS
Mattel	Kool-Aid Man	4675	Yes
Coleco	Lady Bug	2483	No
Mattel	Las Vegas Poker & Blackjack	2611	Yes	Pack-in / Sears #49 75222
Mattel	Las Vegas Roulette	1118	Yes	Sears #49 75208
INTV	Learning Fun I	9002	No
INTV	Learning Fun II	9006	No
Mattel	Lock’N’Chase	5637	Yes
Mattel	Loco-Motion	4438	Yes
Mattel	Major Leage Baseball	2614	Yes	Sears #49 75202
Mattel	Masters of the Universe – The Powers of He-Man	4689	Yes
Mattel	Melody Blaster	4540	L/R	ECS / Piano
Imagic	MicroSurgeon	720013	Yes
Mattel	Mind Strike	4531	Yes	ECS
Intelligentvision	Mine Hunter	9113	Yes
Mattel	Mission X	4437	Yes
Mattel	Motocross	3411	Yes
INTV	Mountain Madness: Super Pro Skiing	9007	No
Coleco	Mouse Trap	3411	Yes	Non-Intv2
Mattel	Mr. Basic Meets Bits’n Bytes	4536	L/R	ECS – 3 sets of overlays
Mattel	NASL Soccer	1683	Yes	Sears #49 75206
Mattel	NBA Basketball	2614	Yes	Sears #49 75203
Mattel	NFL Football	2610	Yes	Sears #49 75201
Mattel	NHL Hockey	1114	Yes	Sears #49 75204
Mattel	Night Stalker	5305	Yes	Sears #49 75236
Imagic	Nova Blast	700022	Yes
INTV	Pac Man	8000	No
AtariSoft	Pac Man	70251	No
Mattel	PBA Bowling	3333	Yes	Sears #49 75223
Mattel	PGA Golf	1816	Yes	Sears #49 75207
Mattel	Pinball	5356	Yes
Activision	Pitfall!	M-002-04	Yes
INTV	Pole Position	9004	No
Parker Brothers	Popeye	941519	No
Parker Brothers	*QBert**	6360	No
Mattel	Reversi	5304	Yes
Activision	River Raid	M-007-03	Yes
Mattel	Royal Dealer	5303	Yes
Imagic	Safecracker	710025	Yes
Intelligentvision	Same Game & Robots	9114	Yes
Mattel	Scooby Doo’s Maze Chase	4533	Yes	ECS
Mattel	Sea Battle	1818	Yes	Sears #49 75213
Interphase	Sewer Sam	8010002	Yes
Mattel	Shark! Shark!	5387	Yes
Mattel	Sharp Shot	5638	Yes
INTV	Slam Dunk Super Pro Basketball	9001	No
INTV	Slap Shot Super Pro Hockey	9003	No
Mattel	Snafu	3758	Yes	Sears #49 75228
Mattel	Space Armada	3759	Yes	Sears #49 75226
Mattel	Space Battle	2612	Yes	Sears #49 75212
Mattel	Space Hawk	5136	Yes
Mattel	Space Spartans	3416	Yes	Intellivoice
INTV	Spiker! – Super Pro Volleyball	9102	No
INTV	Stadium Mud Buggies	9100	No
Activision	Stampede	M-001-04	Yes
Mattel	Star Strike	5161	Yes	Sears #49 75231
Parker Brothers	Star Wars the Empire Strikes Back	6050	No
Intelligentvision	Stonix	9112	Yes
Mattel	Sub Hunt	3408	Yes	Sears #49 75225
Parker Brothers	Super Cobra	941505	No
INTV	Super Pro Decathlon	9008	No
INTV	Super Pro Football	8400	No
Imagic	Swords & Serpents	720009	L/R
Mattel	Tennis	1814	Yes	Sears #49 75218
Mattel	Test Cartridge IMI-v10	n/a	No
Mattel	Test Cartridge MTE-201	n/a	No
Activision	The Dreadnaught Factor	M-004-04	Yes
INTV	Thin Ice	8300	No
INTV	Thunder Castle	4469	No
INTV	Tower of Doom	8600	No
Mattel	Triple Action	3760	Yes	Sears #49 75230
INTV	Triple Challenge	8700	No
Mattel	TRON Deadly Discs	5391	Yes
Mattel	TRON Maze-A-Tron	5392	Yes
Mattel	TRON Solar Sailer	5393	Yes	Intellivoice
Imagic	Tropical Trouble	700017	Yes
Imagic	Truckin’	710023	Yes
Coleco	Turbo	2473	No
Parker Brothers	Tutankham	941509	No
Mattel	U.S. Ski Team Skiing	1817	Yes	Sears #49 75219
Mattel	USCF Chess	3412	L/R
Mattel	Utopia	5149	Yes	Sears #49 75232
Mattel	Vectron	5788	Yes
Coleco	Venture	2477	No	Non-Intv2
Imagic	White Water!	720024	Yes
INTV	World Championship Baseball	5789	Yes
Dextell	World Cup Soccer	8100	Yes
Mattel	World Series Major League Baseball	4537	L/R	ECS / Intellivoice
Activision	Worm Whomper	M-006-03	Yes
Coleco	Zaxxon	2487	No	Non-Intv2

4.2 -Unreleased (or
rumored) titles for the Intellivision

Manufacturer	Title	Notes
Mattel	All-Star Baseball	Prototype exists; INTV released as WC Baseball
Imagic	Beezor
Sega	Buck Rogers Planet Of Zoom
INTV	Choplifter!	Prototype exists
Coleco	Cosmic Avenger
INTV	Flight Simulator
Coleco	Frenzy
Atari	Galaxian
Parker Brothers	G.I. Joe
Mattel	Go For the Gold	Prototype exists; title screen only and complete
Mattel	Illusions	Prototype exists; 100% complete
Parker Brothers	James Bond 007: Octopussy
Parker Brothers	Jedi Arena
INTV	Karateka	Never started
Mattel	Land Battle	Prototype exists; released on INTV Lives CD
Coleco	Looping
Parker Brothers	Lord of the Rings:Journey To Rivendell
Activision	Master of the Lamps
Imagic	Moonsweeper
INTV	Ms. Pac-Man
Mattel	Mystic Castle	Prototype exists. INTV released as Thunder Castle
Mattel	Party Line	Space Cadet, Hard Hat, Blow out; all exists
Coleco	Pepper II
Parker Brothers	Reactor
Parker Brothers	Return Of The Jedi:Death Star Battle
Parker Brothers	Return Of The Jedi:Ewok Adventure
Coleco	Rocky
Mattel	Rocky and Bullwinkle	Prototype exists; 100% complete
INTV	Sea Battle II
Imagic	Shootin’ Gallery
Coleco	Smurf Rescue
Coleco	Smurf
INTV	Speed Freak
Mattel	Space Shuttle	Prototype exists; Intellivoice; not completed
Parker Brothers	Spiderman
Sega	Star Trek
Parker Brothers	Strawberry Shortcake
INTV	Super Pro Auto Racing	Never started
INTV	Super Pro European Bike Rally	Never started
INTV	Super Pro Horse Racing	Never started
INTV	Super Pro Pool/Billiards	Prototype exists; released on INTV Lives CD
INTV	Super Pro Soccer	Prototype exists; contains advertisements; 100% done
Coleco	Time Pilot
Mattel	Tower of Mystery	Prototype exists; INTV released as Tower of Doom
Imagic	Wing War
Mattel	Yogi’s Frustration	Prototype exists; 100% completed
Activision	Zenji

4.3 –Unreleased / Announced titles for
the ECS

Manufacturer	Title	Notes
Mattel	Game Factory	Released on INTV Lives CD
Mattel	The Flintstones Keyboard Fun	Prototype exist; game is playable but not complete
Mattel	Number Jumble	Released on INTV Lives CD
Mattel	Program Builder
Mattel	Song Writer
Mattel	Super NFL Football	Prototype exist; game is playable but not complete
Mattel	Super Soccer	Released on INTV Lives CD

4.4 -Software announced
for the Keyboard Component/Computer Adaptor

These programs were all to have been provided on
cassettes

Manufacturer	Title	Notes
Mattel	J.K. Lasser’s 1980 Federal Income
Mattel	Chartcraft Stock Analysis
Mattel	Jack LaLanne’s Physical Conditioning	Released
Mattel	BASIC	Released as cartridge for Keyboard Component
Mattel	Guitar Lessons & Music Companion
Mattel	Spelling Challenge
Mattel	Geography Challenge	Released
Mattel	Jeanne Dixon Astrology
Mattel	Family Budgeting	Released
Mattel	Crosswords 1	Released
Mattel	Crosswords 2	Released
Mattel	Crosswords 3	Released
Mattel	Speed Reading
Mattel	Conversational Spanish
Mattel	Conversational French	Released

4.5 -Easter Eggs,
Cheats and Tips

4-TRIS

HIDDEN
MESSAGE: If you
press 6+9 on either controller and press RESET, you’ll get a “hello” message
from Joseph. {Joseph Zbiciak}

HIDDEN
MESSAGE: If you
press RIGHT on the LEFT controller, and 5 on the RIGHT controller and press
RESET, you’ll get PONG instead. {Joseph Zbiciak}

ADVANCED DUNGEONS & DRAGONS:
Cloudy Mountain

HIDDEN
MESSAGE: On the
RIGHT controller, hold 0 + either upper side button + disc position 7, then
press RESET. When the title screen appears, push the disc or any button and you’ll
see the map screen (see picture). Both halves of the crown will be assembled
on top of your party and you immediately win the game! {Carl Mueller}

BUG: Move so that a slow-moving monster
(on early levels, this is all of them, but blobs work best) is above you in a
long vertical passage. Walk downwards until the monster is just barely off the
top of the screen, and then quickly return. The monster will often be cloned
or disappear; with blobs, you can get up to three at once from one original. It
takes some practice to get the timing right.

BUG: On the map screen, you move your
party around using the number pad on the controller. If you move your party to
the upper-left corner of the screen, you can press the up/left diagonal and
move off the screen. Keep moving in that direction, and you’ll appear in the
middle of the map. Once you’re in the middle, you need to make one more
“move” before you can return to moving normally. {Joseph Zbiciak}

ADVANCED DUNGEONS & DRAGONS:
Treasure of Tarmin

Increasing
HP: When you start
off, collect as much food as possible. When you fight, use only your bow and
arrows. Make sure you rest after each battle. Collect whatever weapons you can,
but repeating spiritual weapons like scrolls (and books) are great to have. If
you cannot find any, just pick up whatever is available. Okay…you’ve fought a
couple of times, and now you’re out of arrows. KEEP THAT BOW RIGHT THERE! Go
find another monster, and attack him with the bow. You’ll get the ever-popular
“RAZZ” sound, but the monster will attack you anyways. Keep repeating
this until your HP gets as low as you want to go. The lower they go, the
stronger you will become. When you’re tired of letting the monster pummel you,
get one of the other weapons and finish him off. Then rest. VOILA! Your HP will
skyrocket! Normally, this affects your War HP faster than your spiritual HP,
because you are using a war weapon. Your spiritual HP can also go up if you are
being hit by spiritual weapons. Another way to get more Spiritual HP is to get
the Spiritual knowledge book and then continue the method. This will raise your
Spiritual HP faster. In order to get the most out of this, you must do the
following: (1) Find ALL food, (2) Fight as often as you can, (3) Do NOT get
arrows, and (4) Get all of the War and Spiritual skill books (to allow your HP
to go above normal limit). Some other tips- keep a spare bow with you at all
times in case your active one breaks. Also, fight the weakest monsters the
longest. You can sit there and get hit 300 times by a skeleton, then kill him
once and get back 50 HP, even though you only lost 4. This trick also works
with scrolls, but since you never run out of ammo, just use the light blue
scroll against a stronger opponent. Note: only do this if you are really
strong! {Jason Sinclair}

Ever
wanted to see what was behind a wall or a door without the sight book? I did
this on an Intellivision II, so I’m not sure if it works on a I or III… Go to
a “hall of doors” – doors that line up on either side of you. Put an
object down, and then GLANCE left or right. When you glance, if there is
anything behind the door, the object you put down may blink for an instant. If
it does, that means that an object is one or two spaces away in the direction
you glanced. When you return back to your original direction, it may blink
again. Sometimes, when it blinks, it momentarily turns into the object (or part
of the sprite) that was hidden. For example, if a spear is behind the door, the
item may briefly become a spear, and then return to whatever it was. It becomes
easier to see if you glance one way, and then hit the other glance the other
before you come back to your original position. To try this in a more surefire
way, find an eyeball mural that has a closable door beside it. Go through the
door and then turn around to face the door. The eyeball mural will be on the
other side. Put something down in front of you, and glance both directions.
Notice the object you put down- it will blink, and if you’re fast enough, it’ll
turn into an eyeball! The reason this may only work on an INTV II system is
because there is a slight timing maladjustment inherent to all INTV II’s, that
I’s and III’s supposedly don’t. If that is indeed true, then this works
because the timing misfire actually causes the correct sprite to be in the
wrong place due to the screen changes. {Jason Sinclair}

ARMOR BATTLE

HIDDEN
MESSAGE: On the
LEFT controller, press and hold 0 + either upper side button + disc position 7,
and then press RESET. You’ll then see a title screen with “D.E.I.” under the
name, followed by the infamous crowd cheering sound. Note- this only works on
the fast (later) tank version. {Carl Mueller}

HIDDEN
MESSAGE: On the
LEFT controller hold 3, on the RIGHT hold 9, and then press RESET. The title
will change to “D.E.I.”, followed by the infamous crowd cheering sound. Also,
the copyright will say 1984. Note- this only works on the slow (original) tank
version. {from Chris Hawley’s “Copyright Kludge” file}

The
initials DEI that show up in all the different APh games stand for “Dabney
Eats It”. More info on this can be found at:
http://www.ucolick.org/~sla/dei/ {Joseph Zbiciak}

2
versions exist!
The later release has a faster rotational speed on the tanks. {Carl Mueller}

BUG: Drive a tank to the bottom of the
screen, and then inactivate it. Then take another tank (yours or enemies) and
shoot it once or twice to make it move down. Then re-activate the tank, turn
it so it points straight down, and drive forward for a minute or two. The tank
will appear from the top of the screen and the tank will gain some “ghost
tank” powers.

ASTROSMASH

BUG: There’s no check for the score
overflowing — beyond 9,999,999 points, the scoring routine starts displaying
negative numbers, letters, and other ASCII characters. (Ironically, the catalog
description promises “Unlimited scoring potential.”) {BSR}

BUG: Astrosmash started out as a clone
of the arcade game Asteroids, called Meteor!. The game wasn’t very big, so John
Sohl used the extra room in the cartridge to come up with a variation called
Avalanche using the same graphics and sound effects. At the last minute, afraid
of a lawsuit from Atari, the Mattel lawyers killed the Asteroids-like Meteor!.
Rather than risk introducing bugs by deleting code, John simply put a branch
around the opening-screen menu straight into the Avalanche! variation, which
was released under the name Astrosmash. Very rarely, when there’s a glitch
hitting RESET, the Asteroids version will show up on screen. (This would be a
dandy Easter egg if it was intentional or reliably repeatable, but it’s
neither.) {BSR}

AUTO RACING

2
versions exist! A
change was made to make the steering easier (more realistic instead of
intuitive). {BSR}

Press
1+6+9 on either keypad to switch to “real” steering (and vice-versa). {from
Chris Hawley’s “Copyright Kludge” file}

The 5
race courses were created as a “globe” – you can go ‘off the course’ and onto
other courses at many places in the game. Anywhere where there’s daylight in
between trees is explore-able, and often ‘hidden’ areas (like the “Drag
Strip”, a long horizontal area) not mentioned in the manual can be found.

Select
track 1. On the last long strip (before the sharp right turn), drive the car in
the grass underneath the road. The car will never hit an obstacle!

B-17 BOMBER

BUG: Start a game in practice mode and
keep bombing targets over England. The score will eventually roll over and
start displaying text, graphics, and even some bonus items from Lock ‘N’ Chase!

BUG: If your altitude is high enough,
and you’re hit with enough enemy fire, you can rack up so much damage before
you hit the ground that the damage counter will roll over, giving you instant
repair! {BSR}

BUG: Dropping a bomb to the far left of
the screen from just the right altitude will crash the game. {BSR}

BUG: Flying into flak features some
great perspective animation; the rear view, however, doesn’t look quite right.
They ran out of time to debug it. By the way, they also ran out of room for a
flak graphics picture. Instead, the program grabs some of the Executive ROM
program code and graphically displays it. This random jumble of bits passes as
flak. {BSR}

BUG: When the game starts, the bomber
faces east. When you return from a mission, the bomber faces west. When you
start the second mission, the bomber is still facing west, so you can easily
end up halfway to Bermuda, trying to figure out how the English Channel got so
wide and where the German fighters are. {BSR}

BEAMRIDER

HIDDEN
MESSAGE: By holding down 6 on the LEFT
controller and 8 on the RIGHT controller when pressing RESET, you will get the
following message as part of the title info scroll “A Cheshire Game! By David
Rolfe Thanks to Chris, Kevin, Larry & Tom L and Will & Shal!” {Carl Mueller}

BEAUTY & THE BEAST

HIDDEN
MESSAGE: Get to the
point where the ape falls off the building, and press 3 twice on either
controller. The designer’s initials, “WB” (for Wendell Brown), will appear
atop the building. {Gilbert Prince}

BODY SLAM: SUPER PRO WRESTLING

HIDDEN
MESSAGE: To display
the credits, press 0 (zero) on either hand controller while the title screen is
displayed. {BSR}

HIDDEN
MESSAGE: Both
controller button combinations must all be done simultaneously, then press
RESET – on the RIGHT controller, hold 2+3. On the LEFT controller, hold 2+6.
Programmer Steve Ettinger’s message to his family will appear. {BSR}

BOMB SQUAD

BUG: Depending on the level (Level 3 is
the worst), you cannot take a part, with pliers, to extreme ends of the circuit
board when the fast (top action) key is pressed. Once the key is released, you
can. It is most noticeable when you release a part and you need to pick one up
at the top level. {BSR}

BUG: If the wrong part is cut, Frank
will say, “wrong part: re-solder!” and there is a sound associated
with it. If Boris is talking when this happens, his voice overrides Frank’s.
Frank won’t say “wrong part: re-solder,” but the associated sound
still occurs. {BSR}

BUG: When you have correctly soldered a
part, it will not move like the others so that you know what you have replaced.
However, if you solder that piece again, it will start moving. {BSR}

BOXING

HIDDEN
MESSAGE: On the
LEFT controller, press the 2 lower action buttons and push RIGHT (actually
wheel direction #7). {from Chris Hawley’s “Copyright Kludge” file}

BUMP ‘N’ JUMP

BUG: It is possible to jump off the
left side of the screen and land safely on the right on a “secret” road, or
vice versa. If you jump and position yourself so that only the left half of the
car appears on the right edge of the screen (give it a few tries; the position
has to be precise!), you will land safely off the screen and don’t have to do
anything for the rest of the level — you don’t even have to jump at water
hazards! There are only two disclaimers: (1) you will crash if you jump again
(it turns out that the car positions itself one pixel to the left when
jumping); and (2) you have to jump back onto the roadway at the end of the
level, because the car automatically drives toward the center of the screen at
the end and will crash if you do not return. {David Foulke}

CHECKERS / DRAUGHTS

2
versions exist!
The bug in the original version was fixed. Also, the “fixed” version
has different sound effects. The “ting” was replaced with a deeper
“gong”, the “RAZZ” was shortened, and I think the “computer”
sound was shifted down in pitch. The old version sounds “tinnier”
overall. {Joseph Zbiciak}

BUG: The original version had a bug
where it appeared that one of the counters could overflow, and a check was
added to prevent it from doing so (in the later version). {Joseph Zbiciak}

CHIP SHOT: SUPER PRO GOLFER

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.
{BSR}

2
versions exist!
They differ with their spelling of the word caddy (or caddie). {Ian Holbrough}

DEMON ATTACK

HIDDEN
MESSAGE: Press
North + Lower Right Button on the right controller just before you take off to
blast the Mother Ship and you’ll notice something different. According to the
BSR site, the game was written by <G>ary <K>ato. {Arnauld
Chevallier}

DEEP POCKETS: SUPER PRO POOL AND
BILLIARDS

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.
{BSR}

HIDDEN
MESSAGE: If you
press 1 on the RIGHT controller, 2 on the LEFT controller, and press RESET
you’ll get a message from Steve Ettinger to his family. {Joseph Zbiciak}

DEFENDER

HIDDEN
MESSAGE: On the RIGHT
controller, holding 1+5+9+ENTER and pushing the disc UP+LEFT and pressing RESET
causes the following garbled screen to appear. PDF are the initials of
programmer Peter Farson. {Joseph Zbiciak}

DIG DUG

HIDDEN
MESSAGE: Another
Mattel programmer, Dave Warhol, put together his own private version of the
game, TRON Deadly Discs, replacing the enemy warriors with the hot dogs from
Burgertime. He called the result Deadly Dogs. If you want to play it, it’s
hidden in the INTV Corporation release of Dig Dug: press 4+7 on both hand
controllers and press RESET. The Deadly Dogs title screen will appear. {BSR}

HIDDEN
MESSAGE: On the
RIGHT controller, holding 1+5+9+ENTER and pushing the disc UP+LEFT and pressing
RESET reveals the message, “Programmed by Mark Kennedy”. {Joseph Zbiciak}

DONKEY KONG

BUG: You can walk inside of Donkey Kong
himself! Just go up to DK on the top of the second level, running into him
until you can’t run anymore, then push towards him and jump. If you are lucky,
you will jump inside of him! When you want to come back out, you actually walk
backwards. It’s also possible to avoid enemies by hiding inside DK.

DRACULA

HIDDEN
MESSAGE: Select 1
player, Easy level. Finish day 1. On day 2, run right to the first set of
buildings. Run left and you should see a victim. Get him! Run back to the town
and press the “1” button. The letters “AS” (Alan Smith
programmer) appears where the eyes were. You can display it multiple times.
{Simone Razzauti}

DRAGONFIRE

HIDDEN MESSAGE: On the bridge screen, press “1” and cross
the bridge. The letters “AS” (Alan Smith programmer) appears as a treasure. {Arnauld
Chevallier/David Harley/Simone Razzauti}

FROG BOG

HIDDEN
MESSAGE: Both
controller button combinations must all be done simultaneously, then press
RESET – on the RIGHT controller, hold 0+5. On the LEFT, hold 3+5. The title
screen will appear as “TAS & ASN & PK present Froys DEI ©1982”
(picture #1). TAS is for Tom A. Soulanille and PK is for Peter Kaminski.
Anyone know what ASN stands for? Also, the graphics will be different
(picture #2 – Aph’s “mascot”?). {Carl Mueller}

HORSE RACING

HIDDEN
MESSAGE: Press 6+9
on both controllers and press RESET. The color bars will turn into horse
heads, and you’ll get the programmer’s initials, CH (for Chris Hawley), at the
top of the screen. {from Chris Hawley’s “Copyright Kludge” file}

HOVER FORCE

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.
{BSR}

In the game, the island of New Seeburg derives its name from programmer Steve
Ettinger’s initials – SEE. {BSR}

The 2nd
difficulty level, “RANGER”, is named after the Blue Sky Rangers. {BSR}

LAS VEGAS POKER & BLACKJACK

2
versions exist! The
copyright on the title screen has been changed from 1978 to 1979.

LAS VEGAS ROULETTE

HIDDEN
MESSAGE: Press
1+2+3 on the RIGHT controller and 1+3 on the LEFT. The screen below will then
appear. {from Chris Hawley’s “Copyright Kludge” file}

LEARNING FUN II

BUG: While enhancing the game
Crosswords, Dave Warhol (the programmer) accidentally left off a prefix that
indicated a number was supposed to be base 10 instead of base 16. As a result,
the computer only selects words beginning with letters A through T instead of A
through Z. {BSR}

LOCK ‘N’ CHASE

2
versions exist!
Turning corners was made easier; and animation of thief collapsing into his hat
was added. The early version is 6K while the latter is 8K. {BSR}

BUG: If you stand in one of the tunnels
(easiest with the upper) and move continuously back and forth while partway off
the screen, eventually your thief will travel off the screen and disappear
altogether. After a minute or two, he will reappear on the other side.

BUG: When you enter a tunnel and move
the disc up and down really fast you can enter a strip that lets you ring up
points quickly, but you’ll also be trapped there forever. If you wrap around
the screen a few times you’ll hit a “wall” and sometimes be suck
there forever and have to press the reset switch.

BUG: If you have cleared all the coins
in a maze, lock a door directly under the top exit. Run into this locked door
from above; you will stick to it. Then press up: the level will instantly end
without your actually having gone out the exit.

BUG: You will often receive a bonus
(sometimes several thousand points) if you are picking up a coin, vault $, or
other bonus when you lose your last life at the same time.

MAGIC CAROUSEL

HIDDEN
MESSAGE: Connect
the twinkling stars above the carousel on the title screen to get SEE and JAF –
the initials of Steve Ettinger and Joe Ferreira. {BSR}

MICROSURGEON

HIDDEN
MESSAGE: The
programmer’s first name, “rick” (for Rick Levine) can be found in the dark area
below the jaw. {Rick Levine}

MIND STRIKE

HIDDEN
MESSAGE: David
Warhol’s favorite number is 47 (it’s a thing amongst Pomona College alumni), so
board 47 reads “DAVE”. {BSR}

MINEHUNTER

HIDDEN
MESSAGE: On the
menu, press [1] and [7] simultaneously to see Ryan’s message.

HIDDEN
MESSAGE: On the
menu, press [2] and [8] simultaneously to hear a music tune. Press [3] and [9]
simultaneously to hear “Row, Row, Row your boat”.

MISSION X

HIDDEN
MESSAGE: Press 6 on
the RIGHT controller and 9 on the LEFT and hit RESET to bring up programmer
John Tomlinson’s name on the title screen. {BSR}

MOTOCROSS

BUG: The Mattel release does not work
on European PAL systems. You can not get past the map screen. The Intv (white
label) fixed the bug.

NOVA BLAST

HIDDEN
MESSAGE: Press 1 on
both controllers, and then press RESET. You’ll get a screen that says, “W.
BROWN ENGINEERING PRESENTS HYPERBEAM”. {Joseph Zbiciak}

PBA BOWLING

TIP: Chose a 16lb ball, 0 slickness, a
left-handed bowler, then press the disc at the 7 o’clock position. As the dot
becomes whole, release the disc and score a strike every time! {BSR}

PGA GOLF / GOLF

2
versions exist! In
the later version, if you press ENTER you’ll get the par and distance of the
hole. It’s unknown if this feature is documented in the manual. {Ian
Holbrough}

ROYAL DEALER

BUG: The following steps lead to the
problems with Royal Dealer. They occur in all four games. You are rearranging
your cards and have a card out of the deck. Then one of the players lays down
her final card and that round ends. The new round starts and you hit the disk.
The card from the last hand appears. Depending on how you rearrange and throw
your cards, different errors can occur. (If you hit rearrange first, the game
will progress normally, and the errors never occur.) The errors that occur
are: {BSR}

(1)
You can rearrange the blank cards that are displayed. If you rearrange enough
times, the program gets confused and the screen blanks out. You have to hit reset
to start over.

(2)
Sometimes when you lift up a card to rearrange, you see it where the card was.
This usually occurs if this is one card by itself.

(3)
If you have to draw 15 cards and they are all in a row, it usually will not let
you pass. The result is that you have to hit reset to start over.

(4)
In Rummy, if you win the round, the music plays and the card screen comes up.
The screen doesn’t show “GIN” by your hand and a card shows up in
your final hand that wasn’t there before.

Results
are that you can’t continue to the next hand, and you have to hit reset to
start over.

(5)
If a gap appears between your cards, you cannot get to the cards on the left
side of the gap. The gap will go away if you can discard your cards on the
right of the gap. If you need a heart, for example, and you draw until you have
15 cards, you may have to pass. If there is a heart on the left side of the
gap, you cannot get to it, the program sees the heart, and will not allow you
to pass. The result is you have to hit reset to start over.

Because
of this bug, the following errata slip was added to the packaging: {BSR}

“Please
correct your instruction booklet on Page 2 to read: You can only rearrange your
cards each time it is your turn before playing or discarding a card from your
hand. Once you have played or discarded, you must wait until your next turn
before rearranging your cards.”

SLAM DUNK: SUPER PRO BASKETBALL

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.

SLAP SHOT: SUPER PRO HOCKEY

HIDDEN
MESSAGE: Credits
roll automatically if you leave the title screen up long enough

BUG: Go behind your opponent’s goal and
hit the puck toward the back of the center portion of the goal. You’ll hear
the puck quickly bounce back and forth and sometimes you’ll score a point!

SPACE ARMADA

HIDDEN
MESSAGE: Both
controller button combinations must all be done simultaneously, then press
RESET – on the RIGHT controller, hold the lower fire buttons. On the LEFT,
hold either 4+6 to get “SPAZ ARMADA”,

or hold
CLEAR+ENTER for “SPACE BEASTIES” – both by “JWB” (for John W. Brooks). These
alternate game variations only seem to work in ‘practice’ mode. {from Chris
Hawley’s “Copyright Kludge” file}

SPACE BATTLE

2
versions exist!
The game was speeded up for more challenging game play. {BSR}

BUG: Kill all of the aliens except for
one. Next, lose all of your ships except for one, and time it so that you kill
each other. The total alien count should then roll over to 99+ aliens and you
will have to fight them all (“infinite fighting”). {Steve Craft}

SPACE HAWK

BUG: While testing the game, Bill
Fisher (programmer) came across a bug: every now and then, the game would,
seemingly at random, hyperspace you. He and his boss, Mike Minkoff, went over
the code with a fine-tooth comb before realizing what the problem was: the
Intellivision hand controllers encode button presses in such a way that an
action (side) key pressed at the same time as particular directions on the disc
will be interpreted instead as a numeric key being pressed. There was no
software way around this; shooting while moving would occasionally be
interpreted as pressing 9 — the hyperspace button. After several days of
puzzling over a solution, the bug was ultimately “fixed” by including
the following note in the instruction manual: {BSR}

“Every
once in a while, your space hunter will move near a ‘black hole,’ and the
computer will automatically put him into HYPERSPACE. This will cost you the
same number of points as if you had pressed the HYPERSPACE key yourself. On the
other hand, it will save your hunter.”

SPACE SPARTANS

BUG: The level counter is not checked
properly — it allows you to reach one higher level than it’s supposed to. On
that “level,” you can reposition the alien bases as if they were your
own. {BSR}

SPIKER: SUPER PRO VOLLEYBALL

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.
{BSR}

HIDDEN
MESSAGE: If you
press 1 on both controllers and hit RESET, the game menu will be renamed
“Kyle & Russell’s Menu” {Joseph Zbiciak}

STAR STRIKE

HIDDEN
MESSAGE: Press 1+9
or 3+7 on the LEFT controller. {from Chris Hawley’s “Copyright Kludge” file}

2 versions
exist! The later
version corrected a bug, which sometimes made the ship hard to steer with the
left controller. {BSR}

BUG: Hold down the left controller disk
in a single position while simultaneously pressing one of the top action keys.
The fighter will soon remain in a fixed position on the screen. Release the
disk to unfreeze the fighter. {BSR}

STAR WARS: EMPIRE STRIKES BACK

2
versions exist! In
the US and Canadian versions, the Star War theme sounds when “the power is with
you” and when the snowspeeder is invulnerable. In the European version, there
is no music in the title screen and a weird, ugly sound when “the power is with
you”.

SUB HUNT

Presssing
CLEAR+0+ENTER and pointing the disc to “west-north-west” on the RIGHT
controller causes the screen to shake and all the letters “fall off” the
screen. {Joseph Zbiciak}

STONIX

HIDDEN
MESSAGE: Access
hidden levels by holding down [7] on the left controller and [5] on the right
controller when the “Arnauld Chevallier Presents” appears on the screen. The
following screen appears shortly after.

HIDDEN
FUNCTION: Enter
pass code of 250775. The “ACCESS DENIED” message will flash. Go back
to the main menu with [Clear] or enter a valid pass code. During game play,
press [Clear] to go to next level, [0] to go directly to level 100, or [9] to
set number of lives to 9.

SUPER PRO FOOTBALL

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.

2
versions exist!
The bug described below was fixed in the later version. {Ian Holbrough}

BUG: The cartridges were manufactured
before anyone tried the game in an Intellivision II – and discovered that the
quarterback didn’t appear on the screen until after the ball was hiked. An
errata slip had to be included with the (already-printed) instructions. {BSR}

SWORDS & SERPENTS

HIDDEN
MESSAGE: Walk
around the interior of the dragon’s lair and avoid getting killed by the black
knights and evil wizards. The initials of the programmer, Brian P. Dougherty,
will eventually appear.

THE ELECTRIC COMPANY WORD FUN

HIDDEN
MESSAGE: Press
43210 during word rockets mode. {from Chris Hawley’s “Copyright Kludge” file}

BUG: The game won’t work when plugged
into an Intellivision II, since it uses its own copyright routine. A feature to
keep early Coleco-produced Intellivision cartridges from working in the
Intellivision II inadvertently keeps it from working also. Marketing didn’t
feel the game was important enough to hold up release of Intellivision II to fix
the problem. {BSR}

THIN ICE

You can
play as either of two different characters- Duncan or Voochko (there was a plan
to have an ‘Olympic’ version of this game made, with either of these as the
game’s mascot, but this idea was shelved). To switch between them, hold ENTER
on the LEFT controller, CLEAR on the RIGHT controller, and press RESET.

TROPICAL TROUBLE

Steve De Frisco’s initials can be found
in every screen. When chasing down the gorilla, the handkerchief will drop.
Pick it it up for “SD” points.

When crossing the bridge, you need to
touch the gorilla, as he is falling, press [2] & [3] on both controllers.
The initials will show up at the bottom of the screen. {Simone Razzauti}

THUNDER CASTLE

The game
will cycle through all 3 levels if no key is pressed.

Look
closely at the splash screens prior to level 2 and 3. You will see many “CG”
images. Connie Goldman programmed her initials into the screens. On the second
splash screen, the staff handle spells out “Connie”.

TOWER OF DOOM

HIDDEN
MESSAGE:
By typing
1-1-2-6-5-6, a “ticker-tape” style message from programmer Daniel Bass
will appear (but since he didn’t do the final programming for the game,
this was removed). {Daniel Bass}

HIDDEN
MESSAGE: To display
the credits, press 0 on either controller while the title screen is displayed.
{BSR}

TRIPLE ACTION

BUG: In Biplanes, horizontal-flying
bullets headed directly at the narrow spot on the upper half of the tower
sometimes fly right through it, as if the tower wasn’t there.

BUG: Although the game ends when one
player reaches 15 points, bullets in the air at that point are allowed to
score. It’s possible, therefore, to have a game with a 15-15 tie, or to win
with 16 points. {BSR}

TRON DEADLY DISCS

BUG: There is a trick that pretty much
lets you rack up unlimited points, as first pointed out in a letter Mattel
received November 3, 1982 from Steven M. Little, an Intellivision owner in
Minneapolis: “Once you are able to open the top left and top right doors,
which enables you to go in one door and out the other…just step out the right
top or left top door and stay there…90% of the enemy discs go through you and
your man is not hit or destroyed. If you stay at that position, you can reach a
score of 1,000,000 very easily by just breaking the enemy’s discs and throwing
your disc just enough to keep only one enemy on the board at all times. Once
you reach close to a million points, don’t destroy any more warriors. Just hold
your disc in the block mode and break discs. If you do get hit just go back and
forth for repair. (Never throw disc to destroy warrior for you may get a
replacement that carries the stick.) I went from 1,000,000 to 10,000,000 with
no problem.” {BSR}

TRON Maze-A-Tron

Pause
trick: Deactivate a
Recognizer near a Flip-Flop, and then enter the Flip-Flop. The screen will keep
changing direction and no enemies will come your way as long as the deactivated
Recognizer stays on the screen.

TRON SOLAR SAILER

HIDDEN
MESSAGE: When you
enter the access code on track one, append Keith Robinson’s birthday — 991955
— to the code before pressing enter. He’ll wish you luck before the next phase
of the game. {BSR}

TRUCKIN’

HIDDEN
MESSAGE: If you are
driving in Northern California, in the San Jose area, there’s a hidden highway
that goes to Imagic. Basically, you have to find the path to the old Imagic HQ
in Los Gatos, CA. Having a road map (such as Rand McNally) helps, since the
route does not show up on the map in the instruction booklet. If not, the
following directions will suffice: {Rick Levine}

(1)
From the title screen, press 1-1-8-1. This takes the defaults and gives you a
full tank of gas, heading northbound out of San Diego. A no-load, timed
contest.

(2)
Accelerate, but stay below 24 MPH, in order to make the necessary turns.

(3)
Make the 1st left onto I-10, heading eastbound to LA.

(4)
Keep going east, straight towards the coast. I-10 will end and you will
automatically be turned north to Hollywood (HO) on US#01 (actually 101).

(5)
Stay due north through Santa Cruz (SZ).

(6)
As soon as you approach San Jose (SJ), look for the 1st left. Turn here.

(7)
You are now on Route 9 eastbound. A little ways on this road and you’ve found
it! The road will show the Imagic sign off into the horizon. The SJ city code
will change into “RL” (for Rick Levine). You can also see this coming from the
opposite direction.

{step-by-step
info by Al Backiel}

U.S. SKI TEAM SKIING

HIDDEN
MESSAGE: On both
controllers hold either 4+8 or 5+7, and then press RESET. The finish line
banner will then read “PENDRAGON”. {from Chris Hawley’s “Copyright Kludge”
file}

BUG: Face your skier horizontally and
ski into the edge of the screen while the timer is on the screen. Allow the
game to remain at this screen to force the timer to eventually roll over the
numeric characters and begin to display text and graphics blocks. {John F.
Ayo}

USCF CHESS

Russ
Ludwick (programmer) tested the program by playing countless games against the
cartridge at all levels. He found that when playing at the highest levels, the
cartridge was good, but slow. He got in the habit of making a move, then going
home and letting the Intellivision think about a response overnight. Because of
this, three features were added:

(1) the
normal Intellivision time-out feature was disabled,

(2) a
feature letting you switch to an easier level in the middle of a move was
added, and

(3) a
warning that moves at higher levels could take hours, or days, was put into the
instruction book. {BSR}

UTOPIA

BUG: On the right island, there is a
two-by-three rectangle at the upper left. Just to the right of this block is a
one-square bottleneck with water directly above and below it. Sail a boat
(fishing or PT) as if to sail directly into this bottleneck, and ‘push’ against
the resisting sandbar until you’re as far as you can go. Dock (press 0), move
the cursor towards the land until the minimum needed to control the boat is
within the cursor, and select the boat again. You should be able to sail
directly over the land and come out on the other side. Note: in this mode you
will not be able to park your boat anywhere and you will not get your cursor
back. The only way to resume normal boating is to travel the reverse path. The
diagram below illustrates the approximate path:

VECTRON

HIDDEN
MESSAGE: With the
right combination of maneuvers with the energy block, you can get Mark
Urbaniec’s name to appear on screen, with the message, “MARK H. URBANIEC SEZ TO
WATCH YOUR AIM”. Since Mattel forbid hiding names in games, Mark made sure
that the combination was so complicated that no one would stumble across it by
accident. Well, he did such a good job hiding it, that he can’t quite remember
anymore how to do it. {BSR} Luckily, Joseph Zbiciak managed to “decipher” the
method:

(1) For
# of players, press 9. This will start a single-player game.

(2) End
the first 7 levels with your “energy block” in the following
positions. Positions are counted from left to right, with the left-most being
0, and the right-most being 8: Level 1 – 0, Level 2 – 5, Level 3 – 1, Level 4 –
5, Level 5 – 5, Level 6 – 8, Level 7 – 7.

(3) At
the game summary screen (where it shows you how you did), it waits for you to
press a key to continue. Press the number on the keypad that cooresponds to
the same sequence above. That is, after Level 1, press 0. After Level 2, press
5, etc.

(4) If
you complete this long, crazy sequence, you’ll get the following screen:

According
to the instruction book, if you beat the top level, #99, you will be rewarded
with “a special little visual treat.” The treat? Due to space
constraints, there was only room for a message reading “Congratulations.
You are very good.” The difficulty increases so much, though, that it is
thought to be impossible to beat level 99. {BSR}

WHITE WATER

HIDDEN
MESSAGE: On any game version, at the start, go up the river to the
next beach, disembark, and go to the forest screen. “DOUG” (for
programmer Douglas A. Fults) will
appear in the upper-left corner. It will then be on every forest screen,
and also on the river screen when the game ends. {Todd Rogers}

4.8 -Information
regarding Unreleased Titles & Hardware

Most of the information provided here was posted to the
general net populace courtesy of the Blue Sky Rangers and Keith Robinson. For
more information, screenshots, etc. check out http://intellivisionlives.com.

ALBUM CARTRIDGES

– due to the falling prices of RAM, more games could be fit
on to one single cartridge. This spawned the Album Cartridges which where
generally collections of old or simple games. There were 3 known Album
Cartridges: Happy Holidays, Go For the Gold, and Party Line; none were
released.

ADVENTURES OF TRON

– Unreleased version of the 2600 title. Prototype exists

AIR RAIDERS

– The Intellivision’s version of the 2600 title.

AIRSTRIKE

– A side-scrolling game of bombing enemy sites. Unfinished
but playable on the INTV Lives CD.

BASKETBALL II

– An update of NBA Basketball with one more player per side.

COMPUTER CORRIDOR

– An attempted merger of two developing games, Moon Corridor
and Computer’s Revenge. Shelved before completion.

DIG DUG

– Dig Dug was programmed at Atari, but it was still being
debugged at the time they discontinued releasing Intellivision games. It was
debugged and released first through INTV. (#9005)

FLASHLIGHT

-Basic development only

GO FOR THE GOLD

– After spending millions of dollars to secure the 1984
Sarajevo Winter Olympics licensing, they repackaged old sports titles and threw
on a title screen.

GRID SHOCK

– Unreleased but playable on the INTV Lives CD.

HAPPY HOLIDAYS

– Three holiday-inspired games in one: Santa’s Helper,
Easter Eggcitement, and Trick-Or-Treat.

HYDRO PLANE

– A speed racing-planned game based off of a graphical effect
of racing on a lake.

HYPNOTIC LIGHT:

– From a neat graphical effect, a puzzle game was to be
born, alas it wasn’t.

ILLUSIONS

– Same as the Colecovision title, but never released.
Prototype exists.

MASTER OF THE LAMPS

– In development at Activision, the game did eventually get
released on the Atari 8-bit and C64 computers.

MASTERS OF THE UNIVERSE II:

– Engine reincorporated into Diner, and later released by
INTV. Prototype exists.

MAGIC CARPET

– Pilot a magic carpet. Basic design only.

OFF THE WALL

– An arcade-type game to save the humans and kill the green
enemies scaling the walls.

PARTY LINE

– Another Album cartridge. Space Cadet, Hard Hat, and
Blowout.

PIZZATIME

– The planned sequel to BurgerTime before Mattel closed.

ROCKY & BULLWINKLE

– An unreleased Mattel game, prototype exists.

SAILING

– A planned game that fell apart in the transition to design
due to creative differences. Basic design only.

SCARFINGER

– A spy movie-story with game play; incomplete.

SPACE SHUTTLE

– Mattel did a Space Shuttle Intellivoice game that was
unfinished when shut down in Jan ’84. Only the prototype exists.

SPEED FREAK

– Neither Mattel nor INTV did this as an Intellivision game
(INTV may have included this in a list of “upcoming”games, but no
work was ever done on it). Mattel did do a handheld version.

SPINA THE BEE

– Control the bee to collect the pollen. It was judged
unappealing and canned. Prototype exists.

SUPER NASL SOCCER

– In the works at Mattel for the Entertainment Computer
System when closed; the game was completed for INTV and released as a regular
Intellivision cartridge under the name World Cup Soccer.

TARGET ANDROMEDA

– A space version of Dungeons and Dragons that never saw the
light of day.

YOGI’S ADVENTURE

– A Hanna Barbera licensed title that remained unreleased. Completed.

4.9 -Information
regarding Label & Box Variations

There are 4 main “distributors” of the
Intellivision games though we tend to call them manufacturers. For instance,
Atarisoft manufactured the INTV versions of the Atari titles as well as the
Atarisoft release versions.

The 4 “distributors” are:

– Mattel, the original “manufacturer” of the
Intellivision.

– INTV, the company that was formed and bought out the
Mattel rights to Intellivision products.

– Sears/Telegames which distributed Intellivision games and
systems under their own names.

– Telegames, which is still in business and which owns many
of the rights (if not all) to the Intellivision games. Their games are most
likely manufactured by CBS Electronics in Italy, though not all are.

The games originally manufactured to be distributed by
Mattel have a © MI or © MEI on the label. These are the only types of labels
known to have been sold by Mattel.

Sealed INTV boxes (yes INTV boxes were different, though, like
the cartridges, they also used the leftover Mattel boxes) have been found
(frequently) with 3 types of labeled games in them:

1. © II, white label

2. © MI

3. © MEI

4. no copyright or country of origin, colored label

5. no copyright but with a country of origin, colored label

6. no copyright or country of origin, white label

The © II is the closest thing to being a “regular”
INTV release, but not complete proof.

Sears/Telegames released games in specially designed boxes
which are quite easy to identify. They are a dark reddish brown and clearly say
“Sears/Telegames”. The labels on the games sold by Sears/Telegames
are of several types:

1. no copyright or country of origin, colored label

2. no copyright but with a country of origin, colored label

3. © MI

4. © MEI

Telegames releases are in a variety of boxes, most commonly
in a box clearly identified as “Telegames”. They can still be
purchased from Telegames, UK. There are a variety of labels on these games, but
the most common, and the closest to “official” Telegames releases are
a white label with no copyright or country of origin on them. The following
labels have been found in Telegames boxes.

1. no copyright or country of origin, white label

2. All of the above varieties.

There may be a way of telling the White Label, no © , no
country of origin INTV games from the White LabelTelegames in some cases as
there tends to be two distinct styles and sizes of lettering used.

The bottom line is:You can’t tell who sold or manufactured
the games themselves in most cases except:

-If it is © MI or © MEI it was manufactured for Mattel

-If it is © II it was manufactured for INTV

The boxes were manufactured for the company (one of the 4
above) and can be identified as they are clearly marked. They were not
necessarily sold by the same companies.

Keith Robinson had this to add on the subject of labels and
boxes:

Q: I recently came across a pile of Intellivision carts
with white labels only and was wondering if anybody out there knew the scoop on
them. Are they any rarer than the colored versions? The manuals also are in
B&W only, not like the ones I already have. Any help would be much
appreciated. Thanks!!

Pretty cheesy, huh? I was in charge of printing those; Terry
Valeski contracted with me to provide all the packaging for the INTV
Corporation releases. He wanted costs as low as possible, so overlays were
eliminated where possible (Mattel’s policy was that every game had to have
overlays, even if they weren’t really needed, such as for Pinball; Valeski got
rid of them), manuals became black & white (folded, not stapled) and labels
were printed on whatever stock my printer had leftover and would give me a
price break on. That’s why you’ll find different size labels on different
copies of the same game.

Of course, INTV didn’t invent this cost cutting. Mattel’s
Intellivision packaging went downhill quickly, too. The original boxes opened
like a book and had a plastic tray the cartridge fit into. Manuals were all
full color. The plastic tray was the first thing to go, then the manuals went
to two-color, then the boxes simply became boxes (some games, like BurgerTime,
were released in both versions of the boxes).

At INTV, we printed the boxes on an even cheaper grade of
cardboard, but at least Valeski wanted them to be colorful. I designed most of
them with an art budget of about $800 per box. A painter named Steve Huston did
the Super Pro sports covers and I did most of the cartoony covers (Thin Ice,
Learning Fun I & II). Other artists and photographers did individual
titles. I had Joe Ferreira, who did the graphics for Hover Force, do the
artwork for the box. And if the cover art for Thunder Castle looks more
threatening than the cute graphics in the game, it’s because that artwork had
been commissioned by Mattel for the Tower of Doom cartridge. Valeski had it
used for Thunder Castle since that game was already completed when he bought
the Intellivision rights; Tower of Doom was incomplete. He had Tower of Doom
finished later and I had to come up with new art for its box.

(By the way, look for the number 47 on the INTV boxes; that
number is how Pomona College alumni sort of say “hello” to each
other. Dave Warhol, the Pomona alum who produced these games, asked me to slip
a 47 into the art whenever possible. Trivia: another Pomona Alum got onto the
staff of Star Trek, which is why the number 47 pops up in most episodes of Next
Generation and Voyager, and TWICE in the movie Generations.)

Sorry that I can’t answer your real question though, namely
which labels are worth more. That’s a question for the collectors. But
remembering how quickly some of this stuff was slapped together, it amuses me
today to hear people pondering their value.

Q: The boxes do not open like the colored ones right? These
games were reproduced by the INTV corporation after they took over from Mattel.

Mattel had already switched from the book-cover boxes to
standard boxes by the time INTV took over. INTV used up Mattel stock, then made
up new batches of the most popular games. In these cases, the INTV boxes are
identical to the Mattel boxes (printed from the same negatives) except the
Mattel Electronics name is deleted and the INTV name and address is added on
the back. Major League Baseball also underwent a name change to Big League
Baseball, since the Major League trademark either expired or wasn’t
transferable.

All of the INTV games were released in full-color standard
boxes, except for a brief period where they tried to get away with no boxes –
sending out mail orders with the cartridge and instructions simply sealed in a
plastic bag. Consumers complained –loudly –and boxes were quickly reinstated.

5.0) Vaporware, Trivia,
and Miscellaneous

5.1 – Intellivision III

Atari wasn’t the only company with plans to introduce a
“next generation” video game system; Mattel spoke of it’s soon-to-be
released Intellivision III for well over a year before the idea was dumped.
Here are some of the specifications for this unit:

-Built-in Intellivoice

-320 x 190 resolution

-Unlimited colors-Onscreen sprites move at twice the speed
of the original Intellivision-Six channel sound with RCA outputs

-Remote controlled joysticks

-Four controller ports

-Plays original Intellivision titles as well as Aquarius
titles

-12k ROM – 10k RAM

-Able to manipulate 64 sprites onscreen at once

-6-8 titles announced including Air Ace -a flight simulator

-Scrapped for fears of not being able to introduce it before
ColecoVision and the Atari 5200 had too strong a grip on the “next
generation” market.

-Projected price: $300

Please note that this unit is COMPLETELY different from
the INTV III which was later released by INTV Corp in 1986.

5.2 – Intellivision IV

(History taken from http://www.intellivisionlives.com)

After the Intellivision Keyboard Component was canceled,
Mattel was to begin work on a brand new Master Component, the Intellivision IV.
Intellivision III had been rushed into development simply as a stopgap product
to compete short-term with ColecoVision. Intellivision IV, was to introduce the
next generation of video game systems.

It carried the codename Decade, since it was to be the
cornerstone product of Mattel Electronics for the rest of the eighties,
Intellivision IV was developed from mid-1982 to mid-1983 secretly in an
unmarked building a mile away from Mattel headquarters. Being away from the
daily whims and pressures of marketing and administration, the design group was
able to create freely.

The system they created was based on the MC68000 processor,
the CPU later used in the first Macintoshes and the Amiga. Video was handled by
a custom chip named Magic. Screen resolution was 240 by 192 pixels (40 by 24
4-color 6×8 cards) with a programmable 16-color palette, 16×16 4-color sprites
and hardware scrolling. Onboard software supported 3-D graphics along with
music and speech synthesis. The Combo chip coordinated peripheral devices,
including a built-in modem: a point-of-view two-person tank battle played over
phone lines was talked about as a typical Intellivision IV application.

Unlike the other hardware in development in 1983, the
Intellivision IV had the potential of being a significant step forward; after
Intellivision III was canceled, many people saw Intellivision IV as the last
hope for the company. The hope didn’t last long. Most of the hardware people
were soon laid off, including those working on Intellivision IV. The shift
didn’t help; January 20, 1984, Mattel Electronics was shut down.

Would they have succeeded in creating a super game machine
at an affordable price, or would it have been another Keyboard Component? With
all the secrecy surrounding the project, it’s not known how far along the
system really was. We do know it never reached the stage of actual game
development.

5.3 – World Book
Tutorvision

(Special Thanks to: Ted Brunner for finding the
Tutorvision and providing this information)

The World Book Tutorvision is a NR Intellivision.
Apparently, World Book, the makers of the encyclopedia line, licensed the
Intellivision hardware from INTV corp in order to release a line of educational
software for it. This was sometime in the late eighties. However, the deal fell
through, the system was scrapped before it ever hit production and INTV corp
and World Book even went to court over it.

From Keith Robinson, spokesman of the Blue Sky Rangers:

“INTV Corp. made a deal in the late eighties with World
Book to release an orange Intellivision with special educational software. The
entire deal fell apart with both companies suing each other. Dave Warhol of
Realtime Associates, the company that wrote the special games, has always
maintained that neither the system nor the games were ever released.”

However, a prototype model has been found. Concerning
special cartridges for the system, Keith writes:

“Again, since we didn’t think they were released, we
don’t know what they looked like if they were. However, it’s doubtful that INTV
would have spent money on new molds, so they probably would look just like
regular Intellivision cartridges, although possible in the same color as the
master component. We’ve been trying to put together the complete list of the
World Book games, but so far Dave Warhol can’t find his files from the project.
He seems to remember they were to be packaged as two sets with six cartridges
per set. One of the programmers who worked on the games recalls that two of the
titles were ‘Story Stopper’ and ‘Zoo Review.'”

On the inside there of the Tutorvision, there were some
changes from the old Intellivision model I: the ‘brains’ are all on one chip,
and the boardset is now just a single board, instead of a motherboard and a
power board. The board also ran off a single 5v voltage, instead of 5 different
voltages. Most interestingly, the chips were all dated 1988-90, the board was
dated 1988. Furthermore, the system has a power on LED, just like the INTV III.
The buttons on the keypad are bubble-style and not flat like the INTV III. The
system however, plays normal Intellivision cartridges.

It appears that this is an interesting mix of INTV models.
What we are not sure of now is whether the new motherboard layout is the same
as the INTV III or different, and even more so, whether or not the content of
the chips has changed at all.

5.4 – Bandai
Intellivision Japan

Although released domestically in 1980, the Intellivision’s
Japanese debut was over two years later, on July 10, 1982. However, Mattel did
not market or distribute the system in Japan. Instead, they turned to Bandai, a
trusted name in electronics to handle the system in Japan. Thus the Bandai Intellivision
was born.

Bandai had been in the electronic game business for many
years in Japan, starting off with a very successful electronic hand held
Baseball game in the 70’s. In 1977, Bandai released its own electronic video
game system, the TV-Jack series (a video game console with burnt-in games and
no cartridge support). The system was successful, spawning multiple upgrades,
but it was abandoned after its final release (TV-Jack Supervision 8000) in
1979.

This deal to distribute and market the system in Japan
between the two companies was the first of its kind for Bandai, and arguably
the first sophisticated (especially 16-bit) console release in the Japanese
market. From a certain standpoint, it was successful enough and impelled Bandai
to forge similar deals for the Emerson Arcadia (March 1983) and Vectrex (July
1983) in Japan. Interestingly enough, this meant that Bandai was simultaneously
distributing and marketing three video game systems in Japan.

Marketed as a game system that had the 16-bit power of a
personal computer, it had a considerable power advantage over the other
Japanese systems at that time. Take a look at the similar releases at that
time:

1979/10 Epoch Cassette Video Game (8bit) 57,300 yen retail *

1981/07 Epoch CassetteVision (4bit) 13,500yen retail

1982/06 Bandai Intellivision (16bit) 49,800 yen retail

1982/09 Magnavox Odyssey 2 (8bit) 49,800 yen retail

1982/10 Tomy Pyu-Inu Computer (16bit computer) 59,800 yen
retail

1982/11 Takara Game Computer (8bit) 59,800 yen retail

1982/11 Yamagawa Dynavision (16bit) 34,800 yen retail

The bigger names would come in the next year. 1983 saw the
introduction of the true Japanese console video game systems, and Atari
International also re-released the 2600 as the Atari 2800 in May. Although the
Atari 2600 saw a limited released in 1977 as the Epoch Cassette Video Game*,
Atari distributed the 2800 itself this time. However, it was too little too
late for either of them, as Sega and especially Nintendo had quickly became
incredibly popular and controlled most of the video game market. Here is a look
at the major releases for 1983:

1983/3 Bandai Arcadia (8bit) 19,800 yen retail

1983/5 Atari 2800 (Atari International Japan Inc.) (8bit)
24,800 yen retail

1983/7 Nintendo Famicom (8bit) 14,800 yen retail

1983/7 Sega SG-1000 (8bit) 15,000 yen retail

1983/7 Epoch Cassettevision Jr. (4bit) 5,000 yen retail

1983/7 Bandai Vectrex (8bit) 54,800 yen retail

Mattel’s own problems back in America and the collapse of
the American video game market probably led to the abandonment of greater
support for the Intellivision. Moreover, the Intellivision had difficulties
competing with the new, cheap and powerful Nintendo and Sega systems.

In the end, although Mattel had helped increase the
awareness and popularity to start the first generation video game console
market in Japan, it did not last once the large homegrown Japanese companies
took hold. Since Bandai was also busy marketing the Emerson Arcadia and Vectrex
in Japan, it left little support for the flagging Intellivision. There was a
large number of systems–too many for the flowering market. In the end, none of
these foreign systems (including the Intellivision) made a large footprint in
the video game industry in Japan.

Marketing / Distribution of the Bandai Intellivision

As stated before, Mattel did not handle the marketing and
distribution of the Intellivision in Japan. It was handled by Bandai, who
drummed up support for the system in all the standard media. There were even
some television commercials produced for the Intellivision in Japan. A young
actor named Beat Takeshi (who later became a very popular TV and movie actor)
was used in the commercials. They advertised the console with the slogan
“Same 16-bit power as a computer, but no loading times”.

Similar to the Atari distribution in Japan, the games
themselves were untouched. But, in the case of Intellivision, even the boxes
remained completely in English. On these boxes, the franchise rights were
removed. So, Major League Baseball became Baseball, etc. Of course, a Japanese
instruction booklet was provided to inform the customer the basic controls and
how to play. The overlays were also identical to the American ones and remained
in English. Slits were cut in the back of the boxes for the Japanese
instructions. So, if the customers flipped over the box, they saw the front
page of the Japanese instructions.

The box for the base console in Japan was remade completely.
It had the pictures of all the games with a picture of a happy couple playing
the Intellivision in the right hand corner. On the back, it described the
system and showed pictures of Baseball, Space Battle, etc. Inside the box,
there was an instruction manual, warranty card and two promotional catalogs.
The first catalog showed the launch titles, while the second one listed the
games that were coming soon. The box and all of its contents were in Japanese.

It is generally assumed that Bandai was skeptical at the
start, and didn’t want to invest a large amount of money in translating and
re-printing the boxes especially since this was their first time at
distributing another company’s system. But, in the end it was just another nail
in the coffin for the system. The popularity of the games was limited. The
low-cost approach of distribution left customers anxious over a system with
games almost completely in another language.

The retail price of the system was 49800 yen ($210, in 1982
US$). The games themselves cost from 4800-5500yen ($21-23 in 1982 US$).
However, for a 16-bit system at the time, Bandai thought that it was an
attractive price. Plus, the lineup of games at the start was large (including
many sports titles). There were 17 launch games, most of them sports and
popular titles from America. However, the price ended up being too steep for
the base console, and it never became very popular–a key to success in Japan.
Similar to North America and Atari, the Intellivision had the power to compete
at the start with the other consoles, but failed to remain on top. But, in
Japan, it was priced the same as a personal computer. Since it lacked the
additional functionality of the computer, it never really caught on. In a way,
Bandai’s slogan of comparing it to a personal computer only highlighted its
faults.

The Intellivoice module nor any other hardware upgrades were
ever released. Furthermore, no Japanese specific software was ever released. In
total, only 27 (Mattel only) known titles were released in Japan. Overall,
approximately 30,000 units of the base system were sold in total and two years
after it was born, Bandai abandoned the system and the Bandai Intellivision
faded into obscurity.

Bandai Intellivision Frequently Asked Questions:

Q: How did the properties and rights to NHL, NBA, MLB,
NASL, etc. transfer to Japan?

A: It is an interesting question. Since the rights to the
games were not transferable when Mattel sold the rights to the INTV
Corporation, it is doubtful that they were transferable to Bandai. But, it is
unknown whether there was any real infringement or legal action taken by any of
the respective companies. All of the boxes in Japan did not carry any franchise
rights, except for PBA bowling. But, there seemed to be some confusion because
on the back of the box, and in the game catalogs, many of the games appear with
licensing. Even the cartridges and the manuals have licensing.

Q: Any plans for any specific software titles for the
Japanese market?

A: Doubtful. The Intellivision did not last a significant
amount of time. The time and costs involved in developing Japanese specific
titles would have been significant. Furthermore, Bandai did not have a large
software division, nor did it see the gains necessary to invest in one for the
Intellivision. Other software houses in Japan, especially Sega and Nintendo
were concentrating on their own launches. It seems that Bandai didn’t court any
other software companies to produce games for the Intellivision.

Q: Any plans for INTV to re-enter the Japanese market?

A: Highly doubtful. By the time that INTV re-assembled the
Intellivision name, and started selling software again, Nintendo and Sega were
dominating the Japanese market. Any attempt to re-enter would have been futile.
Furthermore, the secret to INTV’s short success in North America was through
significant cost-cutting and completing Mattel’s unfinished games. They would
require substantial capital to re-start the Intellivision engine in Japan.

Q: I look at the list of games, and I don’t see
Astrosmash, what gives?

A: Yes. It never made it here. Probably because it debuted
in 1982, the Space Invaders craze was over by then. Bandai didn’t want to
promote an older game, and concentrated on the more unique titles. Furthermore,
they already chose Space Armada as a launch title. As for why Space Armada was
chosen over Astrosmash, who knows?

Q: Can I play US games in a Bandai Intellivision?

A: The games released in Japan are identical to the American
ones. There is no region lockout because there is only one region. Therefore,
the Bandai can play games from any regional market, just like any
Intellivision.

5.5 – Digiplay
Intellivision South America

Not much is known about Digiplay, other than they initially
seemed to be the Brazilian distributor for Mattel. Most of the original Mattel
games localized for the Brazilian market had fully localized boxes, manuals,
and even cartridge labels and overlays; much more than was done in Japan with
Bandai.

Not only were the games localized, but so was the Master
Component. Their variation of the original 2609, the 5368, even had localized
text on the top of the unit, but was still tagged as being from Mattel
Electronics. The documentation listed Digiplay as the distributor or some such,
I think. The Intellivision II was also produced by Digiplay and even had the
Digiplay logo on the front of the unit in place of the Mattel logo.

It seems that Digiplay was not interested in doing things
halfway. The boxes, manuals, labels, and overlays were almost always completely
translated into Portuguese, and the manuals were even done up with full color
covers. All of the boxes I’ve seen were also book-style boxes even for games
that Mattel delivered in cheaper kinds of boxes. Later releases, like Masters
of the Universe: The Power of He-Man doesn’t bear the Mattel logo at all. In
fact, my He-Man lists “TM -IMAGIC” on the back of the manual.

My guess is that initially, Digiplay had an agreement to
distribute the Intellivision system and worked out some sort of deal with
Mattel. The deal involved a requirement to localize the games for the market.
Then, a few things happened. The market started to soften in the U.S.A. in
1983, but, as things tend to operate in global markets, the crash didn’t hit
the Brazilian market yet. It probably lagged by several months or even a year
or more. Digiplay also picked up permission to deliver Activision and Imagic
games. Later, back in the U.S., Intellivision, Inc. / INTV Corp. kept the
Intellivision alive as well, and Activision bought out Imagic.

Why is that relevant? Well, there is one thing that’s odd to
me about the overlay situation here. Most of the original Mattel games released
by Digiplay seem to also come with localized overlays. However, some seem to
come with overlays that could have come from the Intellivision, Inc. era as
well. By this, I mean that many copies of the original Mattel games came with
overlays that had the Mattel Electronics copyright removed. Well, most of the
Digiplay versions of the older Mattel games came with localized overlays
produced on materials that are clearly very different from standard overlays.
However, some later ones, like Reversi, come with overlays that are in English,
but have no copyright date on them. Similarly, the Activision releases also have
no copyright date on them.

The Digiplay variants are sought by collectors often for
these overlay variations, as well as their packaging differences. The ROMs are
identical to those sold in North America. (contributed by Steve Orth)

Psycho Stormtrooper also sheds some light on Intelli
games – rare, rental bootleg versions of original Intellivision games that were
only available in South America:

The Intelli Games were made by a small company in Rio de
Janeiro. The initals “VLS” are on the back of the game carts, which
does not say much of anything else. The games were made to be rented at local
video stores all over South America. Whether this idea was realized, or the
company went out of business, is unclear to me. The company then contacted the
video stores to offer the games at low prices. Since the American versions of
the games were much more expensive, many were bought by locals in the region.
The games did not come with overlays or a box, but did come with a set of typed
instructions. These game carts are much larger than the regular sized Intellivision
shell. They are even bigger than the Coleco style game carts. There are 4
Intelli Games that are known to exist. They are Utopia, Skiing, Bowling and
Labirintos II (Advanced Dungeons & Dragons: Treasure of Tarmin). The intro
splash screens seem to be the same as the regular titles as does everything
except the case.

5.6 – INTV Corp. Games

INTV enhanced many of the early Mattel titles by adding new
features and making them a 1 or 2 player game by adding a computer opponent.
Below is a list of the original and enhanced cartridges:

ORIGINAL MATTEL CARTRIDGE

ENHANCED
INTV CARTRIDGE

PGA Golf

Chip
Shot Super Pro Golf

Math Fun

Learning
Fun I

Major League Baseball

World
Championship Baseball

NASL
Soccer

World
Cup Soccer

NBA
Basketball

Slam
Dunk Super Pro Basketball

NFL
Football

Super
Pro Football

NHL
Hockey

Slap
Shot Super Pro Hockey

Tennis

Championship
Tennis

US Ski Team
Skiing

Mountain
Madness Super Pro Skiing

Word Fun

Learning
Fun II

Backgammon/Checkers/Chess
Triple
Challenge

5.7 – Trivia and Fun
Facts

Have you ever wondered…

…what would happen if you plugged two Intellivoices
together and then plugged in an Intellivoice game?? Greg Chance did, and the
result goes something like this:

“Someone had asked about daisy-chaining two
Intellivoices together, i.e. plug one into the other, and then a speech cart
into the 2nd one. Ok, I did this with Space Spartans. The 2nd speech synthesizer
kind of canceled stuff out. It said, “Welcome to (bleeeeehahah)” and
then there wasn’t any voice during the game. So that’s the answer. It doesn’t
quite work.”

…what would happen if you tried “frying” your
Intellivision??

The author wasn’t brave enough to try this out on one of his
own machines, but Matthew Long relates this childhood memory:

“I did something like it in the early years. I was
playing Star Strike. I reset the machine. I then pulled out the cartridge. The
screen began flashing through the character ROM. Was really neat when I was
12!”

…who that strange guy in all of those old Intellivision
ads was?

That was George Plimpton, ex-athlete and the Intellivision’s
paid spokesperson between 1980 and 1983. During 1982, Mattel spent in excess of
$50 million so that Mr. Plimpton could lampoon the “unrealistic”
features of the Atari 2600… Little did Mattel know that Coleco would burst
their proverbial bubble with the introduction of the Colecovision in June of
’82.

…how Mattel produced a large portion of their game
library?

Many of the original Intellivision games were programmed by
college students as part of their computer programming classes. Cheap labor?

…what would happen if you plugged your 2600 System
Changer into an un-modified Intellivision I?

An unmodified Master Component (unmodified meaning sans video
upgrade), when turned on with this unit plugged in, reads “M-Network”
on the title screen. You can hear all the sounds from the 2600 game you have
inserted, but no video is displayed, other than this title screen. Ever try
playing Blind Combat?

…the best way to store your boxed Intellivision games??
Shane Shaffer has a great suggestion:

“For your boxed games (unopened), try the Multi-Purpose
Storage Chest from Metro Corrugated and Packaging Corporation. Style No. 20000
has ODs of 21″ x 12 1/4″ x 8 1/4″, and fits 2 rows of boxed
video games perfectly. I forget how many fit in each box, but the height is
just big enough, and the width is perfect. I store my 2600, 5200, 7800, and
Intellivision boxes in it, and others of the same size will also fit. It comes
in 3 colors, Blue, Green, or Red. The fit is absolutely perfect for your boxed
games.”

…what the heck INTV stands for??

Common misconception: INTV is NOT an abbreviation for
Intellivision as many people seem to think. INTV is the name of the company
that bought the rights to the system and all its games from Mattel when they
decided to leave the market in late 1984. Mattel NEVER referred to its system
as INTV.

…why your Intellivision is prone to overheating??

The chipset which provided the guts of the Intellivision,
manufactured by General Instruments, was extremely failure-prone. During the
initial production runs, there were sometimes failure rates as high as 50%!!

…what the most popular Intellivision game was?

Major League Baseball was an instant “classic” and
one of the most popular games for the system. The only “problem” with
this and many other Intellivision games was that they were for 2-players only.

…just how many positions the Intellivision controller
can detect?

Yes, it is 16 positions! This control disc was
“revolutionary” for its time, allowing for greater control with
sports titles, but is also one of the reasons Intellivision never did catch up
to the Atari 2600.

…if INTV Corp. produced NES titles?

Yes, as William Howald found out when he posted this
question, answered swiftly by our friend Keith Robinson: In 1989, INTV planned
to move into NES production and distribution so they commissioned Realtime
Associates (who developed most of the original INTV games) to produce both an
Intellivision and NES version of “Monster Truck Rally.”

When the game was finished, though, INTV had run out of
money and credit to manufacture cartridges, so they sold all rights to the NES
version to another company, who finally distributed it in 1990 or 91. So as to
give that company an “exclusive” on the title, INTV changed the
Intellivision version to “Stadium Mud Buggies.”

“Monster Truck Rally” was the only NES title done
by INTV. Since INTV turned around and sold the game to another company before
securing the rights from Realtime Associates (i.e. paying them), litigation
ensued and the INTV/Realtime relationship fell apart. INTV released no more
product after “Stadium Mud Buggies” (and “Spiker, Super Pro
Volleyball,” released at the same time). INTV filed for bankruptcy in
1991.

Realtime Associates, however, is doing great. They’ve gone
on to produce many NES, SNES, Sega, and GameBoy titles, including “Bug”
for Saturn.

…if there were 2 or more different versions of the
Intellivision II??

Galen Komatsu wondered this, and here are his thoughts on
the matter:

“Just noticed differences between the two Intellivision
II units I have. We’ll call one Ernie and the other Bert.

– On the front nameplate, Ernie has a more bolder looking
black surface, Bert is a bit dulled looking

– Bert has the ® symbol after ‘Intellivision’ and ‘Mattel
Electronics’.

– Ernie has a red stripe around the perimeter of the unit,
Bert, none.

– Ernie’s casing has square corners; Bert’s corners are more
rounded.

– The button squares on Ernie have a matte finish while
Bert’s squares have a more “glossy” finish though the areas
surrounding the buttons are matte.

– Looking at the underside labels, the bright orange “IMPORTANT!”
has “2609-0090-G1” in the upper corner, Bert has
“2609-0090” … both labels mention eligibility for FREE CARTRIDGE if
the unit requires servicing.

5.7 – Competition
Cartridges

A possible competition cart has been found in Brazil. Here’s
how it was found: (courtesy Super Sergio)

“I bought this Astrosmash cart on www.mercadolivre.com.br
(the Brazilian E-bay affiliate) and, after that, I asked the seller some
questions, trying to find out how this cart came to Brazil. He said that he got
it with other cartridges that someone sold him (he already had an Astrosmash
cartridge, but he didn’t realized that this one was different). There are
rumours that this is the “Astrosmash shootoff competition” version,
but no one knows why Mattel had manufactured this version on a cartridge (there
is no label on it, and the identification on the chip says that it was
manufactured in 1984).”

This could either be a cartridge from an Astrosmash
Competition, or possibly even from one of the POWW or PIXX game shows. For more
info, check http://www.intellivisionlives.com

Here are some screenshots from the cartridge:

6.0) Electronic
Resources

6.1 -Internet Resources

World Wide Web pages:

– Blue Sky Rangers Website

http://www.intellivisionlives.com

If anything could be considered an “official”
source of information on the Intellivision, this is as close as it comes.

– INTV Funhouse

http://intvfunhouse.com

There’s a ton of screenshots of rare things, reviews,
listings, etc.

-The Intellivision Zone

http://www.intellivisionzone.com

Another great site for rarities, info, reviews, and
everything Intellivision related.

-Intellivision Exhibition

http://www.hotcom.com/intellivision

Overlays and screenshots from over 100 games.

-Intellivision Gumbo

http://home.earthlink.net/~classic-videogames/intellivision

At this site you’ll find a tasty Intellivision stew, with
pictures of rare Intellivision hardware, games, catalogs and fanzines!

-Intellivision Library

http://spatula-city.org/~intvlib/inty/index.html

News, reviews, downloads, music, basic stuff and more.

-Intellicart

http://www.schells.com/intellicart.shtml

Information on the Intellicart, a cartridge for your
Intellivision to download games from your computer.

-Intellivision Gaming Network

http://intvgn.roarvgm.com

Easter eggs, downloads and tons on the emulators for the
Intellivision.

-Psycho Stormtrooper’s Intellivision Hotspot

http://www.intellivision.org

Brand new overlays for your Intellivision games and a nice
history site too.

Newsgroups:

– alt.games.video.classic

Discussion of classic (pre-crash) game systems and software.
This group may not be available on all sites, and this group does not have very
much traffic.

– rec.games.video.classic

Discussions about any classic (pre-crash) game system are
fair play here… If you have a question (and ask nicely), one of the 40 or so
people who lurk about regularly will be happy to help you.

– rec.games.video.marketplace

If it’s a video game, and someone is selling it (or looking
to purchase it), you can probably find it here. Please note that this newsgroup
is intended for posting of items for sale or items wanted ONLY; discussions
should be kept to rec.games.video.classic. This newsgroup is not limited to the
classic systems.

– rec.games.video.intellivision

Some ISP’s support this, most don’t, so I would recommend
sticking to rec.games.video.classic… However, kinda nice to see a group for
my favorite system.

7.0) Repair Tips and Information

Most of the information provided here has been taken from
the book “Repairing Your Home Video Game: How To Save A Buck While Your
Kids Drive You Insane”, by Gordon Jennings, or has come from personal
experience. Excerpts taken from the book are enclosed in quotes.

!!!!!DISCLAIMER!!!!!

Contained in this FAQ is repair information that may
damage yourself or your beloved Intellivision.I WILL NOT accept any
responsibility for what these instructions. I’ve tried them, and had no
problems.But please don’t blame me for ANY problems these plans may cause.
Experiment at your own risk!

7.1 – Hand Controllers

Let’s face it, I don’t know a single person would that they
prefer the Intellivision hand controllers over a standard joystick with a
straight face, but you’re stuck with them if you own an INTV I or III, as they
are hard-wired into the unit. There WILL come a time when they will fail.
Fortunately, there are some simple steps short of totally disassembling the
main console you can take to fix controllers.

“Inside the controller is a plastic sheet with a
circuit painted (or silk-screened) on it. This is called the Membrane Printed
Circuit Board, or MPCB for short. Often, pieces of the circuit chip off and
cause the controller to short out. This can be repaired by opening the controller
and cleaning out the MPCB with a soft cloth”

“To gain access to the MPCB, loosen and remove the four
small screws on the back of the controller. With the controller facing up, lift
off the top cover. Remove the round control button and the spring beneath it.
There should also be a white plastic spacer, sandwiched between two sections of
the MPCB directly beneath the spring (Note its position. It must be placed back
between these two sections when you put the controller back together)”

“Slide out the black side buttons (When reassembling
the controller, these are useful in holding down the MPCB, which tends to pop
out). Remove the gold numeric pad and the clear sheet (static shield) beneath
it.”

“Remove the MPCB. Visually inspect it to see if it’s
still in good condition. Hold it up to the light; if you see any holes or
breaks in it, it should be replaced.”

To reassemble the hand controller, follow the above
instructions in reverse order. “Note that the MPCB, static shield, and
numeric pad have two small holes in each of them. These holes interlock with
the two pins protruding from the bottom cover of the hand controller, making it
easier to align and adjust the MPCB into its proper position.” If your
MPCB’s require replacement, a great source of spare parts are those totally
trashed, $2 INTV consoles you pass up at the flea market. Not only are the hand
controllers usually in working order, but you get a whole slew of other spare
parts, such as logic boards, transformer assemblies, power supplies and
switches.

7.2 – Cartridge
Problems

Help!! I’ve turned on my console and all I get is a black
screen!! What do I do??

First off, follow the teachings of one of my favorite sci-fi
authors, Douglas Adams: “Don’t Panic!”

Secondly, ensure that the cartridge is properly inserted.
Not inserting the cartridge far enough, or even inserting the cartridge too far
can cause the console not the read the game.

Dirty contacts on the cartridge itself may also cause a
problem; use a cotton swab and some denatured alcohol to remove any corrosion
from the gold contacts (the swabs used for cleaning VCR heads work best, as
they are lint-free). I STRONGLY recommend against using a pencil eraser, as is
so popular in many PC repair circles. Not only does the rubber build up a
static charge in the cart, potentially damaging the ROM’s, it also removes some
of the gold plating on the PC board. Too many treatments of this manner could
result in a useless game.

If you know the problem is not with the cart, all is not lost.
If you’re handy with a volt-ohm meter, you can usually pinpoint the problem to
one of the major components inside the console.

Here’s some helpful information on opening Intellivision
carts:

Mattel had four different designs in their cartridge casings.
The first two had screws holding it together, and the final two didn’t. The
first design uses a common Philips bit. The second uses a triangular bit.
Here’s some info on making your own bit to open those “second generation
cartridges: courtesy of Ryan (TokenGamer)

Take a robertson bit/screwdriver of similar size. Borrow an
angle grinder and roughly but carefully grind down 2 sides to make the square
into a triangle. Use rough to fine sandpaper to do the fine grinding. Tape the
sand paper on a flat table surface and rub the bit on it untill you have the
right size triangle. If you need to round the corners or reduce the diameter of
the bit/shank: put the bit in a power drill, put on a thick glove and pinch the
sand paper around the bit as you run the drill at full speed. it gets hot so if
you don’t have a thick glove you’ll have to do it in stages to let it cool
down. The other method is to try the “pen method” which is only temporary and
doesn’t last very long. Get a plastic pen and take out the ink core. Use a
lighter to soften the plastic but don’t burn it, go slow. When it’s nice and
pliable, jam it into the head of the bit and let it cool completely. When it
cools it will form into the shape of the screw head and you can use it until it
breaks. It doesn’t usually last long. the bic pen method is more for desperate
measures.

7.3 – Console
Disassembly

For those of you, who have seen the inside of an
Intellivision before, skip to the next section. What follows is a basic
description of all of the Intellivision’s major components.

The system is comprised of four major components.
“First is the transformer assembly. The assembly itself is made up of
smaller component; the AC Power Cord, the ON/OFF switch, and a small plastic
connector.”

“The next major component is the power supply board. It
receives AC power from the transformer assembly, and transforms it into several
different DC values. Not only does it convert the voltages, but it also
stabilizes them for the logic board.”

The third sets of components are the hand controllers.

“The final unit is called the logic board. This board
is the brains of the Intellivision.”

Okay, so with Phillips screwdriver in hand, you’re ready to
rip apart your Intellivision. First off, as with any electronic repair work, be
sure that your work area is free of static electricity. I personally use a
wrist grounding strap clipped to some metal portion of your work area.

“Unplug the unit from the wall and from the television.
Remove any cartridge from the machine. Turn the power switch to the ON position
to drain any stored up voltage. Place a soft cloth on your work area. Turn the
console upside down and place it on the cloth. Using a Phillips screwdriver
(some units may require a nut driver), remove the six cover retaining
screws.”

“Turn the unit back over and gently lift off the top
cover. The small brown cover for the ON/OFF switch will come off at this point.
Weave the hand controllers through the holes in the top cover.”

“The insides of the Intellivision are now exposed. You
should be able to identify he four major component groups. There is a brown
plastic plate covering and securing the logic board, transformer and power
supply board. Remove the six screws holding down the plate, and place them
aside.” Be CERTAIN to see how the controllers are placed in this plastic
plate, as they must be replaced in the exact same fashion in order for the top
cover to fit securely.

7.4 – General
Troubleshooting

Some of the procedures listed here will require the use of a
volt-ohm meter. All of this material has been taken from the aforementioned
reference.

Problem: When you turn the game on the screen clears, title
comes on, but game will not play when hand controllers are pushed.

Repair: This normally indicates that on or both of the MPCBs
must be cleaned or replaced. Sometime you can open up the hand controller,
clean it off, put it back together and it will work. (See 7.1 for info.) If you
have cleaned or replaced both MPCBs and the problem still exists, then you may
need a couple of new hand controller cables or a new logic board.

Problem: When you turn the game on, the screen clears (turns
dark), but game title does not appear on the screen.

Repair: With the power switch in the OFF position, take the
cover off the unit. Unplug the transformer assembly from the power supply
board. Place the power switch in the ON position. Using your VOM, test the
following voltages:

-The first readings you’ll need to take are on the plastic
connector of the transformer assembly. They are AC voltage readings. If the
voltages do not read as follows, then replace the transformer assembly, it
cannot be repaired.

Yellow Lead

Blue Lead

Green/Yellow Lead

Green Lead

Yellow Lead to Blue Lead -18 VAC

Green/Yellow lead to any Green -9.25 VAC

Green Lead to Green Lead -18.5 VAC

-Turn the unit off. Reconnect the transformer assembly to
the power supply board.

-Turn the unit ON. The next sets of voltages are DC voltages
and should be read from the other end of the power supply board. They can be
taken right off the cables leading to the logic board. There are two sets of
leads; a small two prong lead near the top of the board, and a flat five prong
lead near the bottom right corner. Place the black clip of your volt-ohm meter
on the lead from the two prong clip farthest from you (if looking down, the
lead closest to the upper right hand corner). Place the other lead of your
meter into the holes for the 5 prong lead each in turn, and note the voltages.
They should read as follows:

+ 5 VDC

+ 12 VDC

+ 16 VDC

+ 0 VDC-2 VDC

If any of the voltages are not present, the power supply
board should be replaced. If you want to attempt to repair the board, most of
the problems are associated with the two voltage regulators, one being a 7805
and the other being a 7812, or the two larger capacitors.

7.5 – Pinouts for INTV
Controller

(Thanks to Jay Tilton for the info)

The original Master Component used a single-row pin header.
The Sears Super Video Arcade and Intellivision II use a 9-pin D-Sub connector.
To make this page more understandable, the pin numbering of the 9-pin D-Sub
connector will be the standard reference. The pair of graphics below show how
pins correspond between the different connectors. The colors of the wires of
the Master Component connector are shown too.

Pin 5 is ground. All other pins are normally high unless a
controller input pulls them low.

Directional disc

Keypad: Keypad buttons are labeled with a “K”
prefix, i.e. K1, K2, etc.

Side Buttons: Top side side buttons are S1, bottom left
side button is S2, and bottom right side buttonis S3. The top button on the
left and right side are functionally identical. This chart tells which lines
are grounded for the given controller input.

x = pin pulled low by controller

Direction

D10

D11

D12

D13

D14

D15

D16

Keypad

Clear

Enter

Side Buttons

7.6 -Fixing INTV II
Controllers

(This little bit of hackery was provided courtesy of
William Moeller)

I just finished refurbishing an Intellivision II unit so I
would have a matching Master Component to go with my ECS. I have found quite a
few units, and they all have the same problems. They are missing the power
supply, and the hand controllers are inoperative. On the original unit, the
mylar keypad is held onto the controller wires by pressure from two screws.
When a hand controller on the original Master component stops working
correctly, usually taking them apart, cleaning and putting them back together,
making sure the screws are tight does the trick. On the Intellivision II
controllers, there are no screws! I ended up breaking one apart to see how they
worked (it was trashed already of course). The knowledge I gained allowed me to
carefully take apart a few controllers to cobble two together to go with my II
Master Component.

The first thing that needs to be done is the top piece has
to be taken off. This is the piece that the disc is flush with. It is held on
by little plastic “hooks”. These “hooks” are located in five
spots. The first is in the center at the bottom of the disc. The next two are
located on both sides, right where the top of the disk ends, and the keypad
begins. The other two are right at the top, where the overlay slides in.

Use a small screw driver to press the plastic at the correct
location, and pry each of the hooks out in an upward motion, being sure not to
break them. This part is very important and cannot be broken. Be sure to look
for the four teeth that slide into the hand controller and rest behind the four
buttons. These cannot be broken. Their purpose is to press the mylar when the
buttons are pressed against them. The buttons push on these plastic teeth,
which in turn puts pressure on the mylar. Take the disc, disc spring, and
plastic cover and put aside.

Now comes the tricky part. Getting the cover off of the base
is difficult. Examine your controller and see if the bottom of the controller
has a crack in it, or if the buttons are broken. If it is obvious the buttons
are broken, try and save the cover… if the bottom and buttons are good,
CAREFULLY press the bottom part of the controller.

Usually, I start on the right hand bottom side, and end up
breaking the hooks there. Then getting the other hooks to let go is a little
easier. Breaking one set of hooks is not that serious, because one can glue the
controller closed on re-assembly. Make sure that the buttons do not get broken
off when sliding the top cover off! Once this step is done, replace the
wires/mylar pad/keypad numbers as required. It is then time to reassemble. Make
sure that you do not forget the circular plastic piece between the mylar. That
is it! Put together the controller the exact opposite order. Happy repairs!

7.7 – Intellivision 2
Controller Modification

(Compliments of Barry Laws Jr)

Does everybody agree with me that the Intellivision 2
controller is worse than the original INTV controller? Hell yeah! The keypad
feels ultra-cheap. Well, I performed a simple mod to my Intellivision 2
controllers, and while Intellivision controllers suck, I actually improved my
INTV2 controllers! Here’s what you need:

Intellivision 2 controller

Intellivision 1 controller

Phillips-head screwdriver

Scissors or Utility Knife (to open up the INTV2 controller)

Turn the INTV1 controller upside down and remove the screws.
Turn the controller right-side-up and remove the top case. The gold controller
disc may possibly lift up as well.

Remove the INTV1 keypad and set it and the gold controller
disc aside for now. Using the scissors or utility knife, open your INTV2
controller. Be careful not to break the plastic hooks which keep the controller
together. Set the top case of the INTV2 controller aside. Remove the flimsy
INTV2 keypad and throw it away. You can also remove the black controller disc
if you want to.

Using a pair of scissors or a utility knife, cut off the top
clear plastic from the INTV1 keypad, and cut the clear plastic side flaps, but
don’t cut the sides off completely.

Position the INTV1 keypad in the INTV2 controller, and make
sure that the keypad buttons are aligned correctly. If you decided to replace
the black controller disc with the gold controller disc, then remove the black controller
disc but leave the small spring in the controller. Place the gold controller
disc on top of the spring.

Put the top case of the INTV2 controller back on, and VOILA!
You have an INTV2 controller with a much better keypad.

Another way of replacing the controller is replacing the
INTV1 controller plug with a standard 9-pin female plug, and/or modifying a
Colecovision controller or a Jaguar controller for use on the INTV2. If you
would rather go one of these routes, then more power to you, and there are
probably instructions on the net and the newsgroups for these mods, but if you
want a simple no-frills mod which combines the look and feel of the INTV1
controller with the outer shell and 9-pin plug of the INTV2 controller, then go
with this mod.

7.8 -You’ve really
messed up and are wondering what to do…

One of the most asked questions we get at the Blue Sky
Rangers is “Where can I get my Intellivision repaired?” Well, the
official Intellivision repair service (i.e. the one Mattel still refers people
to when they call) is:

J.H.C. Electronics Service

901 South Fremont Avenue #108

Alhambra, California 91803

Phone: 818-308-1685

Fax: 818-308-1548

J.H.C. is owned by James Hann, the guy who ran the repair
service for INTV Corporation. While their primary business is special
controllers for newer videogame systems, they still have the equipment to test
and repair Intellivisions and are (amazingly) still willing to do it.

They advertise: “J.H.C. Electronics will repair any
Intellivision video game system, no matter where or when purchased, for one low
price! Complete overhaul, thorough testing, no-charge return shipping to you – only
$49.95.”

J.H.C. can also repair Intellivoice and computer modules.
Call for prices.

Note: They do NOT have Intellivision II power supplies. They
get asked that all the time, and they looked into having some made, but the
minimum order is 500. J.H.C. has 100 people on a list now, and if they get 400
more commitments they’ll have a batch made up. We wouldn’t hold our breath,
unless someone wants to pay $3,000 for the first one to get the ball rolling.
Still, if you want to be added to the list, e-mail us at
Tech@intellivisionlives.com; we’ll pass them along to James if a significant
number of people write.

Finally, if you’ve visited the Blue Sky Rangers website
lately, you’ll have noticed we posted the instructions on how to modify your
Intellivision or INTV Master Component to work with the System Changer (only
the Intellivision II works with the System Changer as is). For those of you who
don’t want to mess with doing this yourself, J.H.C. says they’ll do the
modification for $20. Cheap insurance not to destroy your Intellivision, your
house, or yourself.

7.9 -Hooking your
Intellivision to a Modern TV

If you don’t have a switchbox, or want to hook your
Intellivision up to a modern TV, I would suggest using a Coaxial (F-type) to
Female RCA Adapter, Radio Shack part #278-276. It should cost you about $5 and
it will save you many worries. It connects right on the end of the cord that
would normally go to the switchbox and modifies it so that it will fit into your
coaxial (cable) inputs in your TV or VCR. You will probably notice a much
clearer picture as well. You can also buy new switchboxes from some Radio Shack
if you are interested in buying a new switchbox.

8.0) Programmer
Interviews

The two following interviews were conducted over Internet
with a couple of ex-Mattel Electronics employees by Sean Kelly.

8.1 – Daniel Bass

What was your line of work before you became an
Intellivision programmer?

I joined TRW right out of grad school, I was working there
as a software engineer. I had started in Feb. 1981, just as the Reagan
Administration came into office. The job I was supposed to work on was frozen,
and there was an enormous delay in getting any kind of security clearance, so
that limited what projects were available to me. As a result, I spent my first
year there not accomplishing very much on a variety of small projects.

How/Why did you come to work at Mattel?

In the spring of 1982, I heard on the radio of an Open House
/ Job Fair at Mattel Electronics, and I thought it would be a fun way to spend
the afternoon -playing with their latest games and gadgets. I was not very
happy about my job at TRW, but I wasn’t looking to go anywhere. When I got
there, I started talking to one of the managers about Dungeons & Dragons, a
personal passion of mine. He was looking for some people to develop a D & D
style game for the Intellivision Keyboard, the big keyboard. One thing led to
another, and in a few weeks I was on board at Mattel Electronics.

Exactly which games did you personally program?

Loco-Motion was the only game I programmed start to finish.
I also programmed Tower of Doom but I only had the game about 80% done when
Mattel Electronics went out of business. I had concentrated on the special
effects and mechanics, but I hadn’t put in the game play and strategy that I
had had in mind. A few years later, one of the guys was contracting out with
whoever it was that had bought up all the Intellivision property (was that
INTV?) to finish a bunch of the games that were in development when M.E. went
under. Tower of Doom was one of those games. I had since moved from California
to Massachusetts, and so had not the equipment, nor time to do the completion.
He got one of the other programmers to finish it up, but he didn’t add any game
play either, he just tidied up the loose ends so that the game had an ending
and wouldn’t crash.

Were you involved in programming any other games?

Most games were developed by a single Game Designer, with
the help of certain “specialists.” There were a few graphic artists
who designed most of the graphics for most of the games, a few sound people who
developed most of the sound effects. However, the total game development and
integration was done by a single engineer.

There was a lot of testing, feedback, and reviews amongst
the game designers. A significant portion of our work week was assigned to
playing other people’s games to find bugs, cite improvements and offer
suggestions. To this end I worked on several games, but that wouldn’t qualify
as programming.

I also worked on several projects that just didn’t go
anywhere, and were dropped. The whole big keyboard project (for which I had
been hired) was dropped not long after I started working there. It was deemed
to be to expensive to produce, so that it would be un-saleable. Subsequently it
was redesigned, and code-named “LUCKI” [pronounced ‘lucky’] for Low
User-Cost Keyboard Interface. I started developing a Stock Market game for the
LUCKI, when, one day, the arcade version of Loco-Motion turned up next to my
cubicle. I watched and played several games, and I was hooked. Literally
overnight I had developed an Intellivision prototype of the arcade game, and
the rest, as they say, is history.

What was it like working for Mattel?

It was an absolute blast! The people there were all a bunch
of overgrown kids, and management encouraged us to work on having fun as hard
as get-ting product out. The result was an atmosphere of great teamwork and
camaraderie. Some examples:

The annual office party would be held by renting out a local
video arcade and providing Pizza / Deli / Beer / Sodas and unlimited video
games to all the staff and their families.

The arrival of a new piece of equipment would often lead to
the impromptu creation of a new game, using the packing materials in the hall.
Several of the managers in particular were particularly creative in
constructing these games.

Numerous arcade machines lined the walls of the work areas,
and people were encouraged to take breaks to study the games and improve our
hand-eye coordination.

All of Mattel Electronics and families were invited to
Disney Studios for a private pre-release screening of “Tron” .

Can you fill us in on any ‘unfinished’ projects that may
have been in the works when Mattel Electronics went out of business?

I’m afraid that I can’t be much help here. So I’ll answer a
different question. Things started turning down for the entire video game
market around the beginning of 1983. I finished Loco-Motion, and in the summer,
started working on Tower of Doom. It was originally supposed to be a
voice-optional game, and by the fall I was putting in many long hours focused
on getting that going. Around October, Mattel had its first round of layoffs.
About 1/3 of the staff was gone over-night. The atmosphere had become quite
depressed, and I coped by becoming ever more involved with working on Tower of
Doom, and blocking out what was going on around me.

In November we had the second round of layoffs, and another
third of the staff was gone. It seemed like there was no hope left for the few
of us that remained, but I kept plugging away at T-O-D, hoping that I’d have
enough time to finish the game. Unfortunately, in January 1984, Mattel
Electronics went out of business, and that was that.

So, about all I remember from that time period was how
depressing things got, and how desperate I was getting, hoping that I’d be able
to finish T-O-D.

As game collectors, one of the biggest problems we have
is finding out exactly what games are out there to be had. Do you know of any
games that may be in existence that are not listed on the ‘complete’ listing I
sent you?

I doubt I can help you here. While I enjoyed playing the
games, I was never a ‘walking encyclopedia’ on them.

Do you still own an Intellivision system?

Yes, although I never use it. Now my son Aaron (9 years old)
uses it.

What was/is your personal favorite Intellivision game?

Now you’re going to have me make enemies of all people whose
games I don’t mention! 🙂

Well, leaving aside a personal bias for Loco-Motion and
Tower of Doom, I really like Thunder Castle for its graphics and music. It is
such a pleasure to look at and listen to, that you can forgive it its simple
game play.

There was a Pinball game I liked, but I was always more into
pinball machines than Arcade Video games. Buzz Bombers and Thin Ice were both
cute. My favorite game when I was on mental overload was Shark! Shark! I found
that the colors, sound, and pace of the game was generally restful and relaxing,
unlike most video games which leave you all keyed up and strung out.

8.2 – Ray Kaestner

What was your line of work before you became an
Intellivision programmer?

I came to Mattel straight out of school. I was a EE major.
Initially, I hired on at Mattel to do handheld games, such as electronic
football, basketball, etc. then moved into the Intellivision group after a
couple of years.

How/Why did you come to work at Mattel?

After graduating from UCLA in 1978, I did a lot of
interviewing. Most of the local companies in Southern California were defense
oriented and I wasn’t particularly interested in going down that path at that
time. I also talked to a number of chip companies in Silicon Valley. By far,
the most interesting job was the one at Mattel. I had my doubts about Mattel’s long
term stability, since they had recently completed some litigation about how
they were running the business and also since the toy industry in general tends
to follow boom and bust cycles. However, in the final analysis, it came down to
that sure sounds like it would be a lot of fun.

Exactly which games did you personally program? Were you
involved in programming any other games?

In Intellivision, my games for Mattel were BurgerTime and I
also did about half the programming on Masters of the Universe. After Mattel
got out of the business, I worked on Diner (a BurgerTime sequel) and Super Pro
Hockey for INTV, who took over the Intellivision business from Mattel. I also
worked on the concept development for Super Pro Football, though I didn’t do
any of the programming. In handheld games, I wrote Computer Gin and World
Championship Football. In addition, I also worked with a championship chess
player on Computer Chess.

What was it like working for Mattel?

It was a blast! The best part by far was the team that we
had put together. There was lots of diversity the talents and interests of
members of the group and that added a lot to the quality of the games. In fact,
every year there is the annual layoff reunion party, where everyone gets
together to reminisce and network and all those sorts of good things. Next year
is the 10th anniversary, so there may be some special festivities planned.

Can you fill us in on any ‘unfinished’ projects that may
have been in the works when Mattel Electronics went out of business?

When things went under at Mattel, I was working on a sequel
to Masters of the Universe with a lot of Escher-looking screens. After a few
mutations and change in characters and story line, I was able to finish that game
as Diner, a sequel to BurgerTime done by INTV. When INTV bought out the rights
to Intellivision, they bought the right to all the work in progress at the
time. Much of the work that was fairly far along was later published by INTV,
so you can see what was happening at that point. After a while, we ran out of
pre-existing work, and so we ended up doing some new work and other sequels to
existing games, especially the sports titles.

Do you still own an Intellivision system?

Of course! Since the machines tended to breakdown every so
often and since I suspected that it would become increasingly difficult to get
them fixed, I made sure to store away 3 or 4 Intellivision in the attic to make
sure that my kids would be able to see what I had done at Mattel. So far, I
have only lost one machine, so they were a lot more reliable than I thought
they would be.

What was/is your personal favorite Intellivision game?

Of the work that I did, I would probably rank Diner as my
favorite, followed closely by BurgerTime. I would also rank Night Stalker
pretty highly. I also played a lot of Sea Battle and would count that among my
favorites.

What is your line of work now?

After Mattel went under, since there was so little
commercial work around the area and no video games work anywhere at the time, I
went to TRW to work on defense systems. Fortunately, I was able to get involved
with some pretty fun projects using early versions of Sun Workstations and so I
was able to have some fun, learning lots about GUI and all those things that
are still increasing in popularity. I even designed a paint program for a
government project, probably one of the only paint programs ever done
specifically for the government.

Since then, I’ve moved over to the PC business and am doing
Windows work for first for Software Publishing Corporation on Harvard Graphics
for Windows. I also worked on their Info Alliance project, which was one of the
first GUI database projects available. Unfortunately, though the market was
ready for such a product, SPC was not and the product died an unfortunate
death. Currently, I am at Borland working on future versions of Paradox for
Windows.

Lastly, Dan said I had to ask you about your
“Cheeseburger Birthday Cake”. What gives???

Dan’s wife was taking a cake decorating class and one day
they surprised me and brought in a birthday cake shaped like a giant hamburger.
Obviously the connection was BurgerTime.

8.3 – Patrick Jost

(Former Intellivision speech developer)

How did you come about working with the Intellivision,
and what role did you play in its software/hardware development?

In 1981, I’d been working for Pacific Telephone for about a
year and a half. This was my first real job after leaving graduate school. I’d
messed around with the music industry, done a little “international
consulting”, some of the typical things one does when one does not know
what to do.

Anyway, Pacific Telephone was fun… I was working with
electronic switching, international testing (I got to call Lybia once),
programming custom services, various things. They had lots of UNIX machines to
play with, so it was also a sort of immersion course in Unix computing…

I started to get bored. I’d gone to most of the schools; I’d
worked on various interesting projects. I was spending a lot of time and money
at Opamp Technical Books in Hollywood (still in business, still a great place),
and I was beginning to want to do something more –well –interesting.

Mattel was running huge ads in the paper. At the time, my
main concern was the commute. I lived about 10 minutes from the Pacific
Telephone facility in Hollywood, Hawthorne seemed far away. After a while, I
got over this concern, and went to one of Mattel’s job fairs (back in those
days, LOTS of companies were having them). I got along with the people right
away. Intellivision was an established product; they wanted to do more with it.
They wanted to add voice synthesis. They were looking for someone with a
linguistics background (that’s what I majored in!) and who understood computers
(thank you, Pacific Telephone).

This was Saturday. They asked me to come back Monday. I
talked with some more people, and filled out the application. They were talking
good money, and it sure sounded interesting. By the time I got back to
Hollywood, I had a message on my machine; they offered me the job that day.

I gave notice at Pacific Telephone, gave myself about a week
off, and started to work. My first day was Monday… and already things were
getting interesting. I had to fly to New York the next day to help with the
speech for the first game. This game grew up to be Space Spartans, but, at the
time, all anyone knew was that it was a space game of some sort. It was
supposed to be a short trip; it turned out to be several weeks. I recall that
due to the short notice I got to fly first class, and sat right behind Count
Basie and a member of his band…

I’m getting ahead of myself. Let me explain how speech was
made for these games. Along with the game idea, a script was written. I
transcribed the script (into phonetic transcription) and made sure there were
no critical words that would be “transformed” too badly by the speech
synthesis process.

After the script was written, auditions were held. I used my
contacts in the music industry to find good agents and a good recording studio.
We looked for good voices, good acting, and actors that could work with some of
the odd requirements of speech synthesis –not too many ‘hissing’ ess [s]
sounds, no loud popping p’s and so on. I finally developed a pretty good ear
for which voices would synthesize well…

After the recording, the voices were sampled. We used a
Hewlett-Packard 1000 series machine with the ILS signal processing package and
a large amount of custom software.

The sampled speech was fed to the synthesis software for the
Intellivoice speech synthesizer, the General Instrument SP-256.

Synthesized speech could be generated quickly. The problem
is that automatically generated speech took up a lot of space (that could be
used for more speech or game code). This was a big problem! The other problem
is that the automatic speech synthesis didn’t always sound that good… some of
it was actually pretty bad.

The solution to both problems was manual editing of the
original waveform before the speech was synthesized. This was done with a good,
but somewhat primitive editor. Segments to be used for synthesis could be
marked, and speech could be deleted. The resulting files could be submitted for
synthesis; the results were usually speech that took up less space that the
automatic speech and that sounded good.

For the first six months or so, I did everything –work on
scripts, transcriptions, auditions, recording sessions, speech editing. I did
almost all the speech that you hear on “Space Spartans” and
“B-17 Bomber.”

By the time “Bomb Squad” came along, Mattel wanted
to be more organized. A formal speech group was set up –I trained the editors,
largely on what you hear in “Bomb Squad!” The last speech game was
“Tron: Solar Sailor”, I did not have much to do with that one.

I went on to work on some other things for Mattel: consumer
musical productions, and advanced technologies for the games, specifically a
rapid prototyping environment. For a while Mattel was also very interested in
entering the European marketplace, so I worked on Spanish, German, French, and
Italian versions of “Space Spartans.” That ROM is out there
somewhere…

I’ve heard that Mattel had a “laid back”
environment: it was a fun place to work. Would you say the same?

Fun place to work? Sure, especially if you liked video
games. I didn’t, and still don’t. But remember, this was during the time when
it seemed like there was a Pac-Man machine everywhere.

Mattel had some very good people. Most of us were about the
same age… late 20s, early 30s, I guess. Many common interests apart from the
games. I played Geddy Lee style bass in an informal group called the Redi Spuds
(named after a sign on a nearby building) that played sort of a new wave rock;
yes, a total mismatch of styles, but fun… I shudder to think of what it would
sound like now, with my more Percy Jones influenced style.

You could always find someone interesting to talk to, even
though I don’t think they planned it, there was quite a lot of synergy. In
speech, we were doing things with audio on minicomputers that are commonplace
now in this age of samplers… but we solved the problems years ago.

Laid back? Well, the games programmers didn’t work on much
of a fixed schedule. I was interested in seeing what could be done with natural
language processing technology. I should also say that I’m probably NOT a very
laid back type of person! I was never really all that happy in California, and
my lack of laid back inclinations may explain why I’m one of the few people I know
of who moved from Los Angeles to Washington, DC.

Would you know of any unfinished hardware or software
that Mattel may have been working on (besides the previously mentioned foreign
ROM)? Video game collectors just love this kind of thing.

Unfinished games… there were probably lots and lots of them;
things came crashing down pretty fast. ROMs? I don’t know, probably not many of
them had been made into ROMs yet.

There was a thing called “Decade” which was a
68000 based system that could have been Macintosh like, had they completed it.
There were prototype wireless remote controls for Intellivision. There were
plans for all sorts of interfaces… Apple II, IBM PC, and so on.

You may have seen the Synsonics drums, four touch pads and
some buttons with some rudimentary programming/memory capability. There were
also a Synsonics guitar, with “strum bars” for your right/picking
hand and a neck full of switches for your left/fretting hand. I don’t think
this ever saw production, but I’ve seen things like it in the COMB and DAMARK
catalogues.

Thanks for the interview, Patrick. I appreciated it.

No problem…

9.0) Intellivision
Emulators

The Intellivision lives on, albeit in a different form. Now,
the Intellivision can be emulated by the functions of the PC, PS, or whatever.
Please support the commercial emulators wherever possible! The Intellivision
can live on, let’s not piss on its grave.

9.1 – Commercial
Emulators

Intellivision Rocks / Lives

Intellivision Productions, Inc. offers several games for
download as well as commercial emulators for the PC and Mac. Check out the Blue Sky Ranger’s site for more.
Intellivision Lives! It was also later released in late 2003 for PS2, and early
2004 for Xbox. Sixty games were on the console versions.

Intellivision Classic Games

This was released for the Playstation on 9/29/1999. It’s 30
classic Intellivision games emulated fairly well on the Playstation. The
controls are a bit troublesome, and their choice of games could have been
better, but not bad for those who want to play the classics and don’t want to
mess around with their PC.

Intellivision to TV

Now you can play your favorite Intellivision games without a
console or computer! Just plug Intellivision 10 or Intellivision 25 into your
TV set and away you go! Each unit is a complete video game system -with games
-built into a hand controller. An 8 foot cable from the controller plugs into
the video and audio jacks found on the front of most modern TV sets. A menu
displayed on your TV screen lets you choose from any of the games in the unit.
The suggested retail price in the United States for Intellivision 10 is only
$14.99. Intellivision 25 is only $24.99! Each requires 4 AA batteries (not
included).

9.2 – Non-Commercial
Emulators

Nostalgia – http://www.shiny-technologies.com

This is the newest Intellivision emulator, it has many
features including ECS, Intellivoice, and CGC support. Additional features
include network play, menu system, box/overlay display and text manual reader.

jzINTV – http://spatula-city.org/~im14u2c/intv

The best emulator for Windows, i686/Linux, and MacOS X.

Bliss Emulator – http://bliss.kylesblog.com/

This is an Intellivision/Atari 5200 Emulator for the PC. In
development.

**Please note that the Non-commercial emulators require
ROMs of the games to play. It is illegal to own the ROMs and not the original
cartridges! Do not e-mail me or anyone listed here asking about them. If you
want to play the games, then go spend the money on the commercial emulators, or
play the originals.**

10.0) Credits

FAQ Version 6.3 maintained by Ryan Amos.
FAQ Version 5.5 and earlier maintained by Larry Anderson, Jr. .

The people below, either knowingly or unknowingly, helped
contribute information to this FAQ:

John Bindel	Sean Kelly	David Tipton
Jeff Bogumil	Ken Kirkby	Paul Thurrott
Ted Brunner	Galen Komatsu	Keith Robinson
James Carter	Barry Laws Jr	Steven Roode
Greg Chance	Ralph Linne	Joe Santulli
Jeff Coleburn	Matthew Long	Laury Scott
John Dullea	Doug M	Lee K. Seitz
Clint Dyer	William Moeller	Chris Williams
Jerry Greiner	Steve Orth	Scott Williams
Allan Hammill	Craig Pell	Ryan (TokenGamer)
Ed Hornchek William Howald Joe Huber Chris Neiman	Russ Perry Jr. Robert Poniatowski Jay Tilton David Harley	Jeremy Wilson Super Sergio Roger Mathews (Pycho Stormtrooper)

All right reserved. This document may be copied, in whole
or in part, by any means provided the copyright and contributors sections
remain intact and no fee is charged for the information. Contributors retain
the copyright to their individual contributions. The data herein is provided for
informational purposes only. No warranty is made with regards to the accuracy
of this information. Images in this document are rights of their respective
owners.

1.0 – General Information

1.1 – Brief History of the Mattel Intellivision

1.2 – Timeline

2.0) Technical Information

2.1 – General Hardware Specs

2.2 – Processor Specs

2.3 -Graphics Specs

2.4 -Operating System Specs

3.0) Hardware Descriptions

3.1 – Intellivision Master Component

3.2 – GTE / Sylvania Intellivision

3.3 – Radio Shack Tandyvision I

3.4 – INTV System III

3.5 – Sears Super Video Arcade

3.6 – Intellivision II

3.7 – Keyboard Component / Computer Adaptor

3.8 – Intellivoice Voice Synthesis Module

3.9 – Entertainment Computer System

3.10 – Music Synthesizer

3.11 – System Changer

3.12 – Joystick Substitutes

3.13 – Compro Electronics Videoplexer

3.14 – PlayCable

3.15 – Intellivision Tester (MTE-100)

4.0) Cartridge Listing

4.1 – Released Titles

4.2 -Unreleased (or rumored) titles for the Intellivision

4.3 –Unreleased / Announced titles for the ECS

4.4 -Software announced for the Keyboard Component/Computer Adaptor

4.5 -Easter Eggs, Cheats and Tips

4.8 -Information regarding Unreleased Titles & Hardware

4.9 -Information regarding Label & Box Variations

5.0) Vaporware, Trivia, and Miscellaneous

5.1 – Intellivision III

5.2 – Intellivision IV

5.3 – World Book Tutorvision

5.4 – Bandai Intellivision Japan

5.5 – Digiplay Intellivision South America

5.6 – INTV Corp. Games

5.7 – Trivia and Fun Facts

5.7 – Competition Cartridges

6.0) Electronic Resources

6.1 -Internet Resources

7.0) Repair Tips and Information

7.1 – Hand Controllers

7.2 – Cartridge Problems

7.3 – Console Disassembly

7.4 – General Troubleshooting

7.5 – Pinouts for INTV Controller

7.6 -Fixing INTV II Controllers

7.7 – Intellivision 2 Controller Modification

7.8 -You’ve really messed up and are wondering what to do…

7.9 -Hooking your Intellivision to a Modern TV

8.0) Programmer Interviews

8.1 – Daniel Bass

8.2 – Ray Kaestner

8.3 – Patrick Jost

9.0) Intellivision Emulators

9.1 – Commercial Emulators

9.2 – Non-Commercial Emulators

10.0) Credits